The Effect of Interlamellar Distance in Pearlite on CGI Machining
نویسندگان
چکیده
Swedish truck industry is investigating the possibility for implementing the use of Compacted Graphite Iron (CGI) in their heavy duty diesel engines. Compared to the alloyed gray iron used today, CGI has superior mechanical properties but not as good machinability. Another issue that needs to be addressed when implementing CGI is the inhomogeneous microstructure when the cast component has different section thicknesses, as in cylinder blocks. Thinner sections results in finer pearlite, in the material, with higher strength. Therefore an investigation on its influence on machinability was needed. This paper focuses on the effect that interlamellar distance in pearlite has on CGI machinability and material physical properties. The effect of pearlite content and nodularity is also examined. The results showed that interlamellar distance in pearlite did not have as large effect on the material physical properties or machinability as pearlite content. The paper also shows the difficulties of obtaining a homogeneous microstructure in inhomogeneous workpieces. Keywords—Compacted graphite iron (CGI), machinability, microstructure, milling, interlamellar distance in pearlite.
منابع مشابه
Effects of Tungsten on the Pearlite Reaction in a Eutectoid Steel
The effect of an addition of 0.37 Wt % Won the overall transformation rate of the austenitepearlite reaction in a eutectoid steel is examined. Pearlite growth rates and interlamerllar spacing are measured as a function of transformation temperatures. Tungesten raises the Ael temperature, for most transformation temperatures, decreases the overall reaction rate, the growth rate and the interlame...
متن کاملInfluence of Co and Al on pearlitic transformation in superbainitic steels
Copyright and Moral Rights for the articles on this site are retained by the individual authors and/or other copyright owners. For more information on Open Research Online's data policy on reuse of materials please consult the policies page. Abstract The effect of cobalt and aluminium on the austenite-to-pearlite transformation in a super-bainitic steel was investigated. The experimental work s...
متن کاملCharacterization and Morphological Analysis of Pearlite in an Eutectoid Steel
Pearlite is a lamellar product of eutectoid decomposition, which may form in steels and non-ferrous alloys during transformations under isothermal or continuous-cooling (1,2). A pearlite nodule is composed of multiple colonies; each colony has parallel lamellae, which are orientated differently with respect to lamellae in adjacent colonies. This also exhibits a wide range of interlamellar spaci...
متن کاملNeural Network Model for Isothermal Pearlite Transformation. Part I: Interlamellar Spacing Model
متن کامل
Developing Very Fine Nanopearlitic Structure in a High Carbon Steel Wire before Drawing
The effects of steel wire patenting process parameters on very fine interlamellar spacing in the pearlitic steel wire were investigated and the optimized condition of the process was achieved. In this work, the initial nanopearlitic structure was obtained in a 0.72 wt% carbon steel wire before the wire drawing process. The results were the minimum interlamellar spacing of 35 nm and maximum ulti...
متن کامل