Mass Transfer Studies in Three-phase Fluidized Bed Using Response Surface Method
نویسندگان
چکیده
A. Sivalingam, N. M. Hariharan, T. Kannadasan, M. Thirumarimurugan, and S. Gopalakrishnan Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore – 641 014, Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore – 641 014 Chemical Engineering, Coimbatore Institute of Technology, Coimbatore – 641 014 and Anna University of Technology, Coimbatore, Academic Campus, Jothipuram, Coimbatore – 641 047 Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore – 641 014 Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore – 641 014
منابع مشابه
Numerical study of heat transfer in fluidized bed dryers by volume of fluid method
The purpose of this study is numerical modeling of temperature variation of phases in a two phase regime in fluidized bed dryers including particles belonging to Group D of geldart classification. The mass transfer between phases is not taken into consideration in this modeling which has been assumed in three- dimensional, unsteady, and two-phase regime.To verify the modeling we consider the do...
متن کاملImproving Three Phase Modeling of Fluidized Bed Dryer
Heat transfer phenomena in batch fluidized bed dryer have been studied and analyzed using three phase model including solid phase, interstitial gas phase and bubble phase based on Rizzi model. New correlations of heat transfer coefficient to surrounding and convection heat transfer coefficient between solid and interstitial gas are being proposed. In addition, some modifications have been d...
متن کاملImprovement of Methanol Synthesis Process by using a Novel Sorption-Enhanced Fluidized-bed Reactor, Part II: Multiobjective Optimization and Decision-making Method
In the first part (Part I) of this study, a novel fluidized bed reactor was modeled mathematically for methanol synthesis in the presence of in-situ water adsorbent named Sorption Enhanced Fluidized-bed Reactor (SE-FMR) is modeled, mathematically. Here, the non-dominated sorting genetic algorithm-II (NSGA-II) is applied for multi-objective optimization of this configuration. Inlet temperature o...
متن کاملBed Voidage and Heat Transfer in Non-Newtonian Liquid-Solid Fluidized Bed
The presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. Moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. The aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coeff...
متن کاملCFD Simulation and Optimization of Factors Affecting the Performance of a Fluidized Bed Dryer
Computational Fluid Dynamics (CFD) is a computational technology that enables researchers to study the dynamics of things that flow. By using CFD, it is possible to build a computational model that represents a system under study. It not only predicts fluid flow behavior, but also the transfer of heat, mass, phase change, chemical reaction, mechanical movement, and stress or deformation of ...
متن کامل