The Effect of Vertical Shear-Link in Improving the Seismic Performance of Structures with Eccentrically Bracing Systems
نویسنده
چکیده
Passive control methods can be utilized to build earthquake resistant structures, and also to strengthen the vulnerable ones. In this paper, we studied the effect of this system in increasing the ductility and energy dissipation and also modeled the behavior of this type of eccentric bracing, and compared the hysteresis diagram of the modeled samples with the laboratory samples. We studied several samples of frames with vertical shear-links in order to assess the behavior of this type of eccentric bracing. Each of these samples was modeled in finite element software ANSYS 9.0, and was analyzed under the static cyclic loading. It was found that vertical shear-links have a more stable hysteresis loops. Another analysis showed that using honeycomb beams as the horizontal beam along with steel reinforcement has no negative effect on the hysteresis behavior of the sample. Keywords—Vertical shear-link, passive control, cyclic analysis, energy dissipation, honeycomb beam.
منابع مشابه
Numerical modeling of links behavior in eccentric bracings with dual vertical links
Configuration and geometry of bracing systems affect the seismic performance of structures significantly. Recently, the current authors have introduced a new configuration for eccentric bracing of structural frames that may be assumed as the combination of inverted Y-type and rotated K-type EBFs. The resulted braced frame is called EBF-DVL, consisting of two vertical links attached together by ...
متن کاملSeismic Behavior of Direct Displacement-based Designed Eccentrically Braced Frames
Direct Displacement-Based Design (DDBD) is a performence-based seismic design method that has been proposed and well developed over the past two decades to design RC frame structures, shear walls and bridges. In this method, the behavior of a multi-degree-of-freedom (MDOF) sysytem is approximaeted by an equivalent single-degree-of-freedom (SDOF) substitute structure. Although this method has be...
متن کاملEffect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...
متن کاملEvaluation of the Effect of Connection between RC Shear Wall and Steel Moment Frame on Seismic Performance and Reduction Factor in Dual Systems
Dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. These walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. In this research intermediate dual system of steel moment frame was chosen with int...
متن کاملمدلسازی عددی و عملکرد لرزهای دیوارهای برشی در سازههای فولادی سبک با ترکیب مهاربند تسمه فولادی و پوشش پنل گچی
Diagonal Strap bracing is one of the most applicable lateral bracing systems in light steel framing (LSF). In practice, one or more panels of Gypsum Wall Boards (GWBs) is used for the cladding of strap braced frames. Usually, the effect of these GWBs in modelling and design is neglected by designers, but this effect can affect the seismic performance of the system In this paper, firstly, a simp...
متن کامل