Adaptive Control of a Construction Manipulator
نویسندگان
چکیده
ABSTRACT: The paper describes an advanced control technique that uses a self-adjusting controller. The technique allows changing control parameters of the manipulator according to different technological forces and disturbances acting to the end-effector of the manipulator while performing surface treatment construction operations such as cleaning and polishing. The system is asymptotically stable for the phase error and can be implemented on a base of existed industrial robots.
منابع مشابه
Adaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors
Tracking control of the direct-drive robot manipulators in high-speed is a challenging problem. The Coriolis and centrifugal torques become dominant in the high-speed motion control. The dynamical model of the robotic system including the robot manipulator and actuators is highly nonlinear, heavily coupled, uncertain and computationally extensive in non-companion form. In order to overcome thes...
متن کاملadaptive control of two-link robot manipulator based on the feedback linearization method and the proposed neural network
This paper proposes an adaptive control method based on the feedback linearization technique and a proposed neural network, for tracking and position control of an industrial manipulator. At first, it is assumed that the dynamics of the system are known and the control signal is constructed by the feedback linearization method. Then to eliminate the effects of the uncertainties and external d...
متن کاملA Novel Robust Adaptive Trajectory Tracking in Robot Manipulators
In this paper, a novel adaptive sliding mode control for rigid robot manipulators is proposed. In the proposed system, since there may exist explicit unknown parameters and perturbations, a Lyapunov based approach is presented to increase system robustness, even in presence of arbitrarily large (but not infinite) discontinuous perturbations. To control and track the robot, a continuous controll...
متن کاملAn Adaptive Impedance Controller for Robot Manipulators
A desired dynamic behavior of constrained manipulators can be achieved by means of impedance control and various implementations of fixed controllers have been proposed. In this paper, and adaptive implementation is presented as an alternative to reduce the design sensitivity due to manipulator mismatch. The adaptive controller globally achieves the impedance objective for the nonlinear dynamic...
متن کاملAn Alternative Stability Proof for Direct Adaptive Function Approximation Techniques Based Control of Robot Manipulators
This short note points out an improvement on the robust stability analysis for electrically driven robots given in the paper. In the paper, the author presents a FAT-based direct adaptive control scheme for electrically driven robots in presence of nonlinearities associated with actuator input constraints. However, he offers not suitable stability analysis for the closed-loop system. In other w...
متن کامل