Vision inspection system for the identification and classification of defects in MIG welding joints

نویسندگان

  • G. Senthil Kumar
  • U. Natarajan
  • S. S. Ananthan
چکیده

The variety of vision inspection systems for welding defects in the present manufacturing scenario is needed for overcoming certain limitations such as the problem of inaccuracy in the images, non-uniformed illumination, noise and deficient contrast, and confusion in defects if they occur in the same spot at the surface and subsurface. Hence, it is imperative to design a new vision inspection system which will enable to overcome the aforementioned problems in welding. A sophisticated new vision inspection system using machine vision has been developed for this study to identify and classify the surface defects of butt joint as per standard EN25817 in metal inert gas (MIG) welding. In this proposed vision system, images of welding surfaces are captured through a CCD camera. Four frames of sequence of images are obtained using four zones of LEDs using the front light illumination system in this method. From these images, the regions of interest are segmented and the average gray levels of the characteristic features of these images are calculated. The same process can be extended further to four zones (four quadrants) of four types of welded joints. Finally, welded joints can be classified into one of the four predefined ones based on the back-propagation neural network. The proposed system demonstrates an overall accuracy of 95% from the 80 real samples tested.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Heat Input on Microstructural and Mechanical Properties of AISI 304 Welded Joint Via MIG Welding

In this experimental work, AISI 304 was welded via metal inert gas (MIG) welding process with Argon (Ar) as shielding gas. In the present study, AISI 304 was subjected to different heat input using a standard 308L electrode. Weld quality i.e. ultimate tensile strength, toughness, microhardness, and microstructure of AISI 304 were examined. Microstructures of welded joints were studied using sca...

متن کامل

Identification of Houseplants Using Neuro-vision Based Multi-stage Classification System

In this paper, we present a machine vision system that was developed on the basis of neural networks to identify twelve houseplants. Image processing system was used to extract 41 features of color, texture and shape from the images taken from front and back of the leaves. The features were fed into the neural network system as the recognition criteria and inputs. Multilayer perceptron (MLP) ne...

متن کامل

Optimization of TIG-MIG hybrid welding of 316L austenitic stainless steel

In the TIG-MIG hybrid welding, higher weld efficiency and better weld quality are obtained with respect to each individual TIG and MIG welding methods. Moreover, in this method, the MIG arc is more stable in pure argon shielding gas. Therefore, in this study, the influence of TIG-MIG hybrid welding parameters on the welds appearance quality and welds depth to width ratio of a 316L austenitic st...

متن کامل

Vulnerability Assessment of Steel Structures in District 12 of Mashhad City and Prioritizing the Welding Defects Using the Analytic Hierarchy Process

Recently, steel structures have been accounted for a large percentage of the buildings due to their advantages such as higher execution speed and easier construction. In steel structures, welded joints are commonly used and their quality plays a key role in stability of buildings under applied loads. Hence, to increase resiliency of welded steel structures against natural hazards, welded joints...

متن کامل

Microstructure and mechanical properties of similar and dissimilar welding joints of weathering steel and plain carbon steel by GMAW with CO2 shielding gas

The welding joints were investigated due to the significance of similar welding of Corten A weathering steel and its dissimilar welding with St12 plain carbon steel in industrial applications. The gas metal arc welding (GMAW) technique with carbon dioxide shielding gas was utilized in the present work. The welding process comprised current and voltage control, welding wire injection rate, shiel...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012