Effects of growth on residual stress distribution along the radial depth of cortical cylinders from bovine femurs.

نویسندگان

  • Satoshi Yamada
  • Shigeru Tadano
چکیده

Residual stress is defined as the stress that remains in bone tissue without any external forces. This study investigated the effects of growth on residual stress distributions from the surface to deeper regions of cortical cylinders obtained from less-than-one-month-old (Group Y) and two-year-old (Group M) bovine femurs. In these experiments, five diaphysis specimens from each group were used. Residual stress was measured using a high-energy synchrotron white X-ray beam to penetrate X-rays into the deeper region of the bone specimens. The measurements in the cortical cylinders from Groups Y and M were performed at 0.5- and 1-mm intervals, respectively, from the outer surface to the deeper region of the diaphysis specimens at four positions: anterior, posterior, lateral, and medial. The residual stress was calculated on the basis of variation in the interplanar spacing of hydroxyapatite crystals in the bone tissue. According to the results, the diaphysis specimens from Group Y were not subjected to large residual stresses (average -1.2 MPa and 2.4 MPa at the surface region and 1.5mm depth, respectively). In Group M, the surface region of the diaphysis specimens was subjected to tensile residual stresses (average 6.7 MPa) and the deeper region was subjected to compressive stresses (average -8.2 MPa at 3mm depth). There was a strong significant difference between both these regions. The value of residual stresses at the surface region of the diaphysis specimens in both the groups had a positive statistical correlation with the cortical thickness at the measured locations.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process

Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles and also for creating internal profiles such as rifling the gun barrels. The radial forging of tube is usually performed over a mandrel to create an internal profile and/or size the internal diameter. Most of the previous studies conducted on the radial forging process have u...

متن کامل

Determination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading

In the present article a numerical procedure is developed for dynamic analysis of single and double autofrettage of thick–walled FG cylinders under transient loading. The governing differential equations are discretized and presented in explicit Lagrangian formalism. The explicit transient solution of discrete equations are obtained on the meshed region and results for stress and strain distrib...

متن کامل

Static Analysis of Orthotropic Functionally Graded Material Cylinders with Finite Length by a Mesh-Free Method

In this paper static analysis of orthotropic functionally graded material (FGM) cylinders with finite length was carried out by a mesh-free method. MLS shape functions are used for approximation of displacement field in the weak form of equilibrium equation and essential boundary conditions are imposed by transformation method. In this simulation, an ax symmetric model is used. Mechanical prope...

متن کامل

The Effects of Carbon Nanotube Orientation and Aggregation on Static Behavior of Functionally Graded Nanocomposite Cylinders

In this paper, the effects of carbon nanotube (CNT) orientation and aggregation on the static behavior of functionally graded nanocomposite cylinders reinforced by CNTs are investigated based on a mesh-free method. The used nanocomposites are made of the straight CNTs that are embedded in an isotropic polymer as matrix. The straight CNTs are oriented, randomly or aligned or local aggregated int...

متن کامل

Determination of Relationships between the Ultrasound Velocity and the Physical Properties of Bovine Cortical Bone Femur

Accurate measurements of physical characteristics of bone are essential for diagnosis, assessment of change following treatment, and therefore, indirectly, for evaluation of new forms of therapy. This is particularly true of osteoporosis and aging skeleton, in which fractures occur easily. Methods: In this study an ultrasonic system was set-up and calibrated on Plexiglas tubes of variable thick...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of biomechanics

دوره 46 13  شماره 

صفحات  -

تاریخ انتشار 2013