Sufficient Conditions used in Admittance Selection for Planar Force-Guided Assembly
نویسندگان
چکیده
Admittance control approaches show significant promise in providing reliable force-guided assembly. An important issue in the development of these approaches is the specification of an appropriate admittance control law. This paper identifies procedures for selecting the appropriate admittance to achieve reliable planar force-guided assembly for single-point contact cases. A set of conditions that are imposed on the admittance matrix is presented. These conditions ensure that the motion that results from contact reduces part misalignment. We show that, for bounded misalignments, if the conditions are satisfied for a finite number of contact configurations, the system ensures that force guidance is achieved for all intermediate configurations. Keywords— assembly, admittance, compliance selection.
منابع مشابه
Admittance matrix design for force-guided assembly
Joseph M. Schimmels Michael A. Peshkin Department of Mechanical Engineering Northwestern University Evanston, IL 60208 Abstract This paper addresses manipulator admittance design with regard to reliable force guided assembly. Our goal is to design the admittance of the manipulator so that, at all possible part misalignments, the contact forces always lead to error-reducing motions. If this obje...
متن کاملForce-assembly with friction
If an admittance control law is properly designed, a workpiece can be guided into a fixture using only the contact forces for guidance (force-assembly). Previously, we have shown that: 1) a space of accommodation control laws that will ensure force-assembly without friction always exists, and 2) as friction is increased, a control law that allows force-assembly can be obtained as long as the fo...
متن کاملA New Intelligent Approach to Patient-cooperative Control of Rehabilitation Robots
This paper presents a new intelligent method to control rehabilitation robots by mainly considering reactions of patient instead of doing a repetitive preprogrammed movement. It generates a general reference trajectory based on different reactions of patient during therapy. Three main reactions has been identified and included in reference trajectory: small variations, force shocks in a single ...
متن کاملScheduling of Multiple Autonomous Guided Vehicles for an Assembly Line Using Minimum Cost Network Flow
This paper proposed a parallel automated assembly line system to produce multiple products having multiple autonomous guided vehicles (AGVs). Several assembly lines are configured to produce multiple products in which the technologies of machines are shared among the assembly lines when required. The transportation between the stations in an assembly line (intra assembly line) and among station...
متن کاملForce-Guided Assemblies Using a Novel Parallel Manipulator
In this paper we present recent experimental results using a novel parallel manipulator operating under Natural Admittance Control performing difficult mechanical assemblies. The example assemblies are components from an automotive automatic transmission. Success depends on appropriate force responsiveness, rather than precise position control. The robotic assemblies are shown to be gentler tha...
متن کامل