ELF wave generation in the ionosphere using pulse modulated HF heating: initial tests of a technique for increasing ELF wave generation eciency
نویسندگان
چکیده
This paper describes the results of a preliminary study to determine the eective heating and cooling time constants of ionospheric currents in a simulated modulated HF heating, `beam painting' con®guration. It has been found that even and odd harmonics of the fundamental ELF wave used to amplitude modulate the HF heater are sourced from dierent regions of the ionosphere which support signi®cantly dierent heating and cooling time constants. The fundamental frequency and its odd harmonics are sourced in a region of the ionosphere where the heating and cooling time constants are about equal. The even harmonics on the other hand are sourced from regions of the ionosphere characterised by ratios of cooling to heating time constant greater than ten. It is thought that the even harmonics are sourced in the lower ionosphere (around 65 km) where the currents are much smaller than at the higher altitudes around 78 km where the currents at the fundamental frequency and odd harmonics maximise.
منابع مشابه
ELF/VLF wave generation using simultaneous CW and modulated HF heating of the ionosphere
[1] Experimental observations of ELF/VLF waves generated using the dual‐beam heating capability of the High frequency Active Auroral Research Program (HAARP) HF transmitter in Gakona, Alaska, are compared with the predictions of an ionospheric HF heating model that accounts for the simultaneous propagation and absorption of multiple HF beams. The model output is used to assess three properties ...
متن کاملDual-beam ELF wave generation as a function of power, frequency, modulation waveform, and receiver location
[1] Dual-beam ELF wave generation experiments performed at the High-frequency Active Auroral Research Program (HAARP) HF transmitter are used to investigate the dependence of the generated ELF wave magnitude on HF power, HF frequency, modulation waveform, and receiver location. During the experiments, two HF beams transmit simultaneously: one amplitude modulated (AM) HF beam modulates the condu...
متن کاملOn the generation of ELF/VLF waves for long‐distance propagation via steerable HF heating of the lower ionosphere
[1] ELF/VLF radio waves (300 Hz to 30 kHz) have been successfully generated via modulated HF (3–10 MHz) heating of the lower ionosphere in the presence of natural currents, most recently with the HAARP facility in Alaska. Generation is possible via amplitude modulation or via two techniques involving motion of the HF beam during the ELF/VLF cycle, known as beam painting and geometric modulation...
متن کاملGeometric modulation: A new, more effective method of steerable ELF/VLF wave generation with continuous HF heating of the lower ionosphere
ELF/VLF waves can be generated via amplitude modulated HF heating of the auroral electrojet, which turns a patch of ionospheric currents into a radiating antenna. A new, more powerful technique, termed `geometric modulation', involves scanning the HF beam in geometric patterns with no power modulation. Utilizing results obtained from the HAARP facility, we show that geometric modulation enhance...
متن کاملOn the altitude of the ELF/VLF source region generated during beatwave HF heating experiments
[1] Modulated high frequency (HF, 3–10 MHz) heating of the ionosphere in the presence of the auroral electrojet currents is an effective method for generating extremely low frequency (ELF, 3–3000 Hz) and very low frequency (VLF, 3–30 kHz) radio waves. The amplitudes of ELF/VLF waves generated in this manner depend sensitively on the auroral electrojet current strength, which varies with time. I...
متن کامل