Data interrogation for Fabry-Perot whitelight interferometry
نویسنده
چکیده
Among various optical fiber distance sensing techniques, optical fiber sensors based on white-light Fabry-Perot interferometry offer the simplest configuration, the highest sensitivity, and the most precise distance measurement. Because a whitelight interferometric sensor can overcome the directional ambiguity problem encountered by the other interferometric techniques, it is especially attractive for applications where absolute distance measurement is desired. However, conventional two-fringe matching data demodulation technique can induce a half wavelength error to the distance measurement. In this paper, we present an improved fringe matching data interrogation technique that can overcome this problem. The data interrogation scheme consists of two steps: a rough estimation of the distance and the phase shift using the two fringe matching technique and a more precise estimation of the distance and the phase shift using the correctional terms derived from the fringe difference. Simulation results indicate that the algorithm can converge to the correct distance with sub-Armstrong accuracy over a large dynamic range.
منابع مشابه
Bragg grating-based fibre optic sensors in structural health monitoring.
This work first considers a review of the dominant current methods for fibre Bragg grating wavelength interrogation. These methods include WDM interferometry, tunable filter (both Fabry-Perot and acousto-optic) demultiplexing, CCD/prism technique and a newer hybrid method utilizing Fabry-Perot and interferometric techniques. Two applications using these techniques are described: hull loads moni...
متن کاملFactors affecting the performance of micromachined sensors based on Fabry–Perot interferometry
The noise and performance limitations of optical sensors that utilize Fabry–Perot interferometry detection are investigated. A Fabry–Perot interferometer consists of two partially transparent parallel plates with reflective inner surfaces. The plates form a cavity with an optical resonance that depends on the distance between them. At resonant wavelengths, the incident light energy is transmitt...
متن کاملNovel Optical Design of Folded Fabry-perot Displacement Measurement Interferometer
Due to its high resolution and the large measuring range, laser interferometer has been applied widely to the precision industrial measurement and calibration. Fabry-Perot interferometry was often used for the microdisplacement, because of its common optical path structure being insensitive to the environmental disturbances. In the past researches, some kinds of modified Fabry-Perot interferome...
متن کاملInterferometry and laser control with solid Fabry-Perot etalons.
The use and analysis of solid Fabry-Perot etalons for interferometry and laser control are discussed and supported with experimental data. Low angle scattering is found to be an important factor influencing finesse and peak transmission. Thermal tuning sensitivity and wedge-angle control with thermal gradients are analyzed and illustrated. Control of laser oscillations using a solid-state etalo...
متن کاملHigh-accuracy Fabry–Perot displacement interferometry using fiber lasers
We describe ongoing work in a Fabry–Perot interferometry system designed to measure displacements over a range of 50 mm with sub-pm uncertainty. The apparatus involves probing two nearby modes of the Fabry–Perot cavity with narrow-linewidth fiber telecom lasers and measuring both the mode spacing and the absolute mode frequencies relative to a third, frequency-stabilized, fiber laser. We explor...
متن کامل