Low Cost Catalytic Configurations for Mid-Range CNG Lean Burn Engines for BSIV Emission
نویسندگان
چکیده
This paper deals with the optimization of the catalytic convertor for CNG Lean burn Engine based on BS4 compliances. In addition to the present catalytic convertor the work is carried out for the optimization of catalytic convertor and also to meet the BS4 compliance and also to reduced cost for the same. In this project we have prepared the samples with some variation in the substrate with respect to each other on which the Palladium group metals (PGM) coating is applied. The mass of the substrate and the Coating decides the weight and the cost of the Catalytic convertor which was reduced. Secondly main concern was the 100% utilization of the substrate. This was achieved by working on cann in terms of the Cone angle and the length before the substrate.
منابع مشابه
An Experimental and Theoretical Study of the Effects of Excess Air Ratio and Waste Gate Opening Pressure Threshold on Nox Emission and Performance in a Turbocharged CNG SI Engine
Turbocharged CNG engines produce high NOx emission due to the fuel type and high combustion temperature. In this research, the effects of lean-burn and waste gate opening pressure threshold on NOx emission are studied theoretically and experimentally at WOT condition as well as 13-mode ECE-R49 test cycle. A code is developed in MATLAB environment for predicting engine NOx and the results are va...
متن کاملPerformance and Exhaust Gas Emissions Analysis of Direct Injection Cng-diesel Dual Fuel Engine
Existing diesel engines are under stringent emission regulation particularly of smoke and particulate matter in their exhaust. Compressed Natural Gas and Diesel dual fuel operation is regarded as one of the best ways to control emissions from diesel engines and simultaneously saving petroleum based diesel fuel. Dual fuel engine is a conventional diesel engine which burn either gaseous fuel or d...
متن کاملOptimization of NOx Storage Performance through Modifying Catalyst Composition and Alumina Support
The usage of lean-burn engines is a promising strategy for improving the fuel economy of vehicles and reducing the emission of greenhouse gas CO2. The most complex challenge for leanburn engines is the need to find a solution for the increased levels of NOx emissions. Lean NOx trap (LNT) or NOx storage-reduction (NSR) catalysts provide a very effective method for NOx removal in lean-burn gasoli...
متن کاملReal time model predictive idle speed control of ultra-lean burn engines: experimental results
Idle speed control of ultra-lean burn engines continues to be a major focus of automotive engineers owing to the benefits offered in terms of fuel economy and emissions reduction. This paper applies a recently proposed linear time varying model predictive approach for the idle speed control of ultra-lean burn internal combustion engines. Unlike conventional gasoline engines, the approach uses f...
متن کاملExperimental Investigation of The Performance Response of A Spark Ignition Engine to Adding Natural Gas to Gasoline in Lean-Burn Condition
Considering the disadvantages of gasoline and natural gas as mono-fuel in SI engines has made the researchers to improve the performance and reduce the pollutant as the advantages of the application of dual fuel engines. On the other hand, lean-burn in engine may lead to the reduced pollutant. In the present study various mixtures of gasoline and natural gas with the gasoline as the dominant fu...
متن کامل