Triggering and guiding HV discharge in air by filamentation of single and dual fs pulses.

نویسندگان

  • Zhe Zhang
  • Xin Lu
  • Wen-Xi Liang
  • Zuo-Qiang Hao
  • Mu-Lin Zhou
  • Zhao-Hua Wang
  • Xun Liu
  • Jie Zhang
چکیده

The triggering and guiding of the stationary high voltage (HV) discharges at 5-40 kV are demonstrated by using plasma filaments generated by single and dual femtosecond(fs) laser pulses in air. A significant reduction of the breakdown voltage threshold due to the pre-ionization of the air gap by laser pulse filamentaion was observed. The amount of free electrons of filaments generated by different pulse configurations was compared by sonography method. The lifetime of filaments is measured by using time-resolved fluorescence spectrum, and the lifetime of filaments generated by dual fs laser pulses was doubled due to the re-ionization by the succeeding pulse. The triggering ability of dual fs laser pulses was demonstrated to be enhanced due to the longer lifetime of filaments.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Triggering and Guiding of High-voltage Tesla Coil Discharges by Femtosecond Laser-induced Plasma Filaments in Air

We report experimental guiding of high-voltage (HV) sparks discharges in air with plasma filaments generated by a terawatt femtosecond laser. Large sparks discharges are shoot up from a HV electrode fixed at the top of a Tesla coil voltage elevator to a farther grounded one. Ultrashort laser pulsed beams of energy on the order of the mJ through open air exhibit non-linear propagation effects. I...

متن کامل

A simple high-voltage high current spark gap with subnanosecond jitter triggered by femtosecond laser filamentation

We describe a simple, sturdy and reliable spark gap operating with air at atmospheric pressure and able to switch currents in excess of 10 kA with sub-nanosecond jitter. The spark gap is remotely triggered by a femtosecond laser filament. Many applications rely on the initiation of a well controlled discharge between two charged electrodes. For high current applications, a gas-filled trigger is...

متن کامل

Friction stir welding of accumulative roll bonded single phase brass

Single phase brass strips with 2 mm thickness were severely deformed through 1 and 3 cycles of accumulative roll bonding process (ARB). ARB process effectively increased the hardness, yield strength, and the ultimate strength of the processed materials. The hardness of processed material increased from 95 HV in annealed material to 225 HV in 3 cycle ARBed material, and the yielding and ultimate...

متن کامل

Friction stir welding of accumulative roll bonded single phase brass

Single phase brass strips with 2 mm thickness were severely deformed through 1 and 3 cycles of accumulative roll bonding process (ARB). ARB process effectively increased the hardness, yield strength, and the ultimate strength of the processed materials. The hardness of processed material increased from 95 HV in annealed material to 225 HV in 3 cycle ARBed material, and the yielding and ultimate...

متن کامل

HV discharge acceleration by sequences of UV laser filaments with visible and near-infrared pulses

We investigate the triggering and guiding ofDChigh-voltage discharges over a distance of 37 cmby filaments produced by ultraviolet (266 nm) laser pulses of 200 ps duration. The latter reduce the breakdown electric field by half and allow up to 80%discharge probability in an electric field of 920 kVm. This high efficiency is not further increased by adding nanosecond pulses in the Joule range at...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 17 5  شماره 

صفحات  -

تاریخ انتشار 2009