Voltage-Current Characteristic Test for Bridge Body of Ignition Device of Semiconductor Bridge
نویسندگان
چکیده
To further grasp the voltage-current characteristics for ignition device of semiconductor bridge and accordingly guide the actual application, the voltage-current characteristics for the bridge body of ignition device of semiconductor bridge are tested in the paper. Firstly, introduce the principle of SCB circuit and provide the connection circuit, device elements to be used and symbolic expression; secondly, conduct SCB voltage-current characteristic test with the resistance in the form of serial-parallel connection based on charging and discharging and curve equation of diode I-V; finally, with regard to the typical RLC second-order system characteristic for the bridge body of ignition device of semiconductor bridge, compare the test values and simulation values of voltage and current to verify the effectiveness of experimental process.
منابع مشابه
Circuit Simulation for Bridge Ignition Feature of Semiconductor
The emergence of ignition device of semiconductor bridge provides a way to resolve the conflict between low energy and high promptness, reliability and safety of initiating explosive device. But with the rapid development of arms and ammunition, the higher demand of miniaturization for structure and volume in design of initiating explosive device is put forward based on high safety, reliability...
متن کاملMemristor Bridge Synapse Application for Integrate and Fire and Hodgkin-Huxley Neuron Cell
Memory resistor or memristor is already fabricated successfully using current nano dimension technology. Based on its unique hysteresis, the amount of resistance remains constant over time, controlled by the time, the amplitude, and the polarity of the applied voltage. The unique hysteretic current-voltage characteristic in the memristor causes this element to act as a non-volatile resistive me...
متن کاملHarmonic Reduction Technique Using Flying Capacitor Based Z Source Inverter for a DVR
The Dynamic Voltage Restorer (DVR) is a commercially available, popular device to eliminate voltage sags and swells in the distribution lines. Its basic function is to inject the voltage difference (difference between the pre-sag and sag voltage) to the power line and maintains the pre-sag voltage condition in the load side. The efficiency of the DVR depends on the performance of the efficiency...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کاملAnalysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype
One of the difficulties with PWM switching converters is high switching loss and electromagnetic interference due to switching at non-zero voltage and current, which limits the operating frequency. In order to reduce the converter volume and weight (by increasing the frequency) and reducing switching losses, zero voltage and current switching methods are recommended. In this paper, four main ze...
متن کامل