MPC Controller Performance Evaluation and Tuning of Single Inverted Pendulum Device
نویسندگان
چکیده
Inverted pendulum is a non-linear, multivariable and unstable device, a model predictive control (MPC) performance evaluation and tuning method for inverted pendulum device is proposed. MPC was designed to control the inverted pendulum device, and the minimum variance covariance constrained control (MVC) was applied to evaluate the performance of the MPC controller and tune its parameters. The application results to a single inverted pendulum device have verified the feasibility and effectiveness of the proposed method.
منابع مشابه
Design and Implementation of Model Predictive Control for a Gyroscopic Inverted Pendulum
This study proposes the design of an active stabilizing system (ASAS) for a single-track vehicle. Using the gyroscopic effects of two flywheels, this system can generate control torque to stabilize the vehicle in cases where there is centrifugal force of turning. To control the flywheel gimbals to generate stabilizing torque, a model predictive controller (MPC) is applied to control the system....
متن کاملComparative Assessment of Predictive Controllers for an Inverted Pendulum with Three Conflicting Control Objectives
Model predictive control (MPC) designates a class of moving-horizon optimal control techniques based on the use of a process model to make predictions of the plant output. Over the past 30 years, several MPC formulations have been reported in the literature. These formulations differ from each other mainly in the type of process and disturbance models adopted, as well as in the cost function to...
متن کاملMINIMUM TIME SWING UP AND STABILIZATION OF ROTARY INVERTED PENDULUM USING PULSE STEP CONTROL
This paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. Our rotary inverted pendulum is supported bya pivot arm. The pivot arm rotates in a horizontal plane by means of a servomotor. The opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. A pendulum is suspended at thejoint. The task is to design a contro...
متن کاملTuning of PID Controller of Inverted Pendulum Using Genetic Algorithm
This paper presents different types of mathematical modelling of Inverted Pendulum and also a Proportional-Intregal-Derative (PID) controller is designed for its stabilization. After desiging of PID controller some reference stable system has been selected and then different types of error has been optimized (minimized) by using Genetic algorithms. The proposed system extends classical inverted...
متن کاملStabilization of the Inverted Pendulum with Backlash Using $H_{infty}$-LMI Technique
The rotary inverted pendulum, also named Furuta Pendulum, has been studied extensively for control performance evaluation in under-actuated mechanisms. The H∞ control invoking Linear Matrix Inequality (H∞-LMI) has been also wide employed for linear control design. This paper deals with the feasibility ofH∞-LMI technique to stabilize the rotary inverted pendulum around its unstable equilibrium p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- JCP
دوره 8 شماره
صفحات -
تاریخ انتشار 2013