Technique for the Determination of the Rate of Ethylene Production by Pseudomonas solanacearum.
نویسندگان
چکیده
A tube culture system was designed for measurement of ethylene evolved by the phytopathogenic bacterium, Pseudomonas solanacearum. The system consisted of 10 glass tubes joined together in series and coated on the inside surface with a dextrose-peptone-casamino acids agar medium. The system provided a large surface for bacterial growth in relation to the volume of air. The system was seeded with a bacterial suspension (7 x 10(8) cells/ml) drawn through all the tubes by vacuum applied at one end and was then placed in a water bath at 30 C. Air was pumped through the system at 3 ml/min; the outlet was connected directly to the inlet port of a gas sampling loop and ethylene in the sample was determined by gas chromatography.Maximum rate of ethylene production for a fluidal, virulent isolate of P. solanacearum (K60) was 5.5 x 10(-9) moles/min and occurred at the end of lag phase and beginning of stationary phase. Three other fluidal isolates produced ethylene at relatively low rates (2.4-6.4% that of K60). Avirulent, butyrous variants of these isolates grew as well as the virulent forms in most cases, but ethylene production rates per cell were much lower for the avirulent than for the virulent forms. Loss of virulence appears to be accompanied by lower ethylene production.Peak CO(2) production (14.5 mumoles/min) and O(2) consumption (11.7 mumoles/min) for isolate K60 also occurred at the time when the bacterial culture was entering stationary phase. The concentrations of O(2) (11%) and CO(2) (11%) in air present at this time were thought to be neither limiting nor inhibitory to bacterial growth.
منابع مشابه
Determination of kinetic parameters for ethylene polymerization (with and without hydrogen) by Ziegler-Natta catalyst.
In this study, slurry polymerization kinetics of ethylene with TiCl4/Mg(OEt)2/AlR3 Ziegler-Natta catalysts in various conditions using the model of sum square error (SSE) (method I) and model of least square error (LSE) (Method II) was investigated. For this purpose the molecular weight distributions of the samples were deconvoluted to the minimum number of Flor...
متن کاملThe Determination of Metallo-Beta-Lactamase Enzymes Prevalence in Pseudomonas Aeruginosa using Etest and their Antibiogram Patterns in Kermanshah, Iran
Background & Aims: One of the main causes of nosocomial infection is pseudomonas aeruginosa and carbapenems is one of the most important classes of antibiotics used in the treatment of infections caused by this bacteria. Metallo-beta-lactamase (MBL) production is one of the most important mechanisms of resistance to carbapenems and their increased prevalence is a serious threat to treatment of ...
متن کاملDetermination of Nutritive Value of Soybean Varieties Using in vitro Methods and Gas Production Technique
This study was conducted to determine the nutritive value of soybean varieties using in vitro methods and gas production technique.In vitro gas productions and gas production kinetics of soybean variety were determined at 0, 3, 6, 12, 24, 48, 72 and 96 h incubation times. This study revealed that there were variations among five different soybean varieties in terms of chemical...
متن کاملHeat Transfer Calculation in the Firebox of the Ethylene Plant Furnaces (RESEARCH NOTE).
The thermal cracking of hydrocarbons for olefin production is carried out in long tubular reactors inserted in a furnace, in this process the heat flux along the reactor wall determines the feedstock conversion, the olefin selectivity's and rate of coke deposition. A detailed firebox simulation model is therefore a powerful tool in the design and operation of pyrolysis furnaces and reactors to ...
متن کاملPreparation and Characterization of Diols and Polyols Based on Aminolysisof Poly (ethylene terephthalate) Wastes with Alkanolamines
The Plastic Waste phenomenon, which is the result of increasing poly (ethylene terephthalate) production and the wide range PET consumption in different industries, caused one of the major environmental concerns. Therefore,many different ways have been studied and applied for chemical recycling of PET. One of the most important ways to depolymerize poly (ethylene terephthalate) is the aminolysi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Plant physiology
دوره 56 5 شماره
صفحات -
تاریخ انتشار 1975