The Research On The Performance Of Oil-gas Cyclone Separators In Oil Injected Compressor Systems With Considering The Collision And Breakup Of Oil Droplets
نویسندگان
چکیده
The high-speed swirling flow field in the cyclone oil-gas separator will cause the breakup of oil droplets, thus reducing the separation efficiency. In this paper, the performance of an oil-gas cyclone separator was investigated through both numerical simulations and experiments with considering the breakup of oil droplets in oil-gas cyclone separators. The gas flow field was simulated using the RSM turbulence model and the trajectory of the oil droplets was calculated by the Discrete Phase Model(DPM).The breakup of oil droplets was simulated by TAB model and the wall boundary of oil droplets was treated as Reflect boundary. Meanwhile, the separation efficiency was measured and the Malvern Particle Size Analyzer was applied to get the droplets diameter distribution at the inlet and exit of the oil-gas cyclone separators to verify the simulation model. The results showed that the separation efficiency was influenced significantly by the breakup of oil droplets, especially for the high inlet velocity. The simulation results based on the presented model were in good agreement with the experimental data.
منابع مشابه
Effect of Surface Roughness on Vortex Length and Efficiency of Gas-oil Cyclones through CFD Modelling
Separation of suspended droplets in a fluid flow has been a great concern for scientists and technologists. In the current study, the effect of the surface roughness on flow field and the performance of a gas-oil cyclone is studied numerically. The droplets and the turbulent airflow inside the cyclone are considered to be the discrete and continuous phases respectively. The Reynolds stress mode...
متن کاملA Novel Approach to Obtaining the Optimum Pressure and Stages of Separators
Nowadays, the increasing demand for energy in the world is one of the main concerns for energy supply. In fact, the required energy can be obtained by increasing the production rate of fossil fuels such as oil and natural gas. However, improving the efficiency of the equipment and facilities might have a significant impact on production from hydrocarbon resources. With respect to this subject, ...
متن کاملPower Consumption Minimization of Khormoj Compressor Station
Arguably, the natural gas transmission pipeline infrastructure in Iran represents one of the largest and most complex mechanical systems in the world. The optimization of large gas trunk lines known as IGAT results in reduced fuel consumption or higher capability and improves pipeline operation. In the current study, a single-objective optimization was conducted for Khormoj compressor station o...
متن کاملPerformance Analysis of Oil-Injected Screw Compressors and its Applications
A computer model for performance analysis of rotary screw compressors was introduced in a previous paper by the authors(!). In this paper, experimentally obtained flow and heat transfer characteristics are used in the performance simulation. Heat transfer coefficient is determined from experimental relation between the volumetric efficiency and the inlet temperature. Flow coefficients are obtai...
متن کاملHeat Transfer in Oil-Flooded Screw Compressors
Thermodynamic efficiency of the compression process in oil-flooded screw compressors depends greatly on the oil-gas heat transfer process. The amount of heat transfer is a function of many parameters such as mode of oil injection, oil inlet temperature, etc. This paper describes a mathematical model to calculate this heat transfer, assuming that the oil is injected in the form of non-interactin...
متن کامل