Fdi with Adaptive Residual Generation Applied to a Dc-servo
نویسندگان
چکیده
When parity equations are designed ad hoc., the low frequency gain of the fault-to-residual transfer function can become low or even zero which is highly undesirable. As a solution, a systematic design procedure, utilizing the freedom available in residual generator design, is proposed. The method is called residual shaping and guarantees reasonable performance. It is used together with RLS to form an adaptive residual generator, which is important to handle e.g. aging. The RLS algorithm also makes it possible to differentiate between additive and multiplicative faults. The proposed FDI system is evaluated on a DC-servo where the strengths of the system is illustrated.
منابع مشابه
Identification and Adaptive Position and Speed Control of Permanent Magnet DC Motor with Dead Zone Characteristics Based on Support Vector Machines
In this paper a new type of neural networks known as Least Squares Support Vector Machines which gained a huge fame during the recent years for identification of nonlinear systems has been used to identify DC motor with nonlinear dead zone characteristics. The identified system after linearization in each time span, in an online manner provide the model data for Model Predictive Controller of p...
متن کاملAdaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory
In this paper, based on feedback linearization control method and using a special PI (propotational integrator) regulator (IP) in combination with a feed-forward controller, a three-phase induction servo-drive is speed controlled. First, an observer is employed to estimate the rotor d and q axis flux components. Then, two input-output state variables are introduced to control the dynamics of to...
متن کاملAdaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory
In this paper, based on feedback linearization control method and using a special PI (propotational integrator) regulator (IP) in combination with a feed-forward controller, a three-phase induction servo-drive is speed controlled. First, an observer is employed to estimate the rotor d and q axis flux components. Then, two input-output state variables are introduced to control the dynamics of to...
متن کاملTorque Control for DC Servo Motor Using Adaptive Load Torque Compensation
A torque control system is an important process in industries. The value of torque which is generated by DC servomotor depends upon a motor current. Since the torque control system uses the estimated current from an observer, it will receive an effect from torque disturbance (load torque) during an operation. The incorrect estimated current from the observer affects a current feedback signal. T...
متن کاملAdaptive Unstructured Grid Generation Scheme for Solution of the Heat Equation
An adaptive unstructured grid generation scheme is introduced to use finite volume (FV) and finite element (FE) formulation to solve the heat equation with singular boundary conditions. Regular grids could not acheive accurate solution to this problem. The grid generation scheme uses an optimal time complexity frontal method for the automatic generation and delaunay triangulation of the grid po...
متن کامل