DSP-Based Field-Oriented Step Motor Control
نویسندگان
چکیده
The SMC3 motor drive has been built using an Analog Devices ADSP-2101 digital signal processor (DSP). The SMC3 is designed to work with two-phase step motors, which are permanent magnet motors with many (typically 100) poles. The firmware in the SMC3 DSP drives the step motor phase windings using field-oriented control rather than using single steps. This method derives the maximum theoretical performance from the motor. This paper describes field-oriented control, and how the SMC3 hardware and firmware implements it.
منابع مشابه
Optimizing speed and angle control of stepping motor by using field oriented control
In the present study, field oriented control of step motor implementation has been analyzed sothat it can make a Sensorless control. Efficiency and Facilities of step motor is more than othertypes of electromotor. Therefore, the numbers of mechanisms and different types of turning canbe made into them. Also controlling these motors is easier than other available motors. Steppingmotor has been d...
متن کاملDsp Based Implementation of Field Oriented Control of Three-phase Induction Motor Drives
Abstract The objective of this paper is to presents a practical implementation of field oriented control of three-phase induction motor based on Space Vector Pulse Width Modulation technique using Digital Signal Processing (DSP) board TMS320F2812. The control algorithm for the drive application is built with Code Composer Studio version 3.1. The motor control is divided into two control loops; ...
متن کاملSensorless Indirect Field Oriented Control of Single-sided Linear Induction Motor With a Novel Sliding Mode MRAS Speed Estimator
This paper proposes a new sliding mode control (SMC) based model reference adaptive system (MRAS) for sensorless indirect field oriented control (IFOC) of a single-sided linear induction motor (SLIM). The operation of MRAS speed estimators dramatically depends on adaptation mechanism. Fixed-gain PI controller is conventionally used for this purpose which may fail to estimate the speed correctl...
متن کاملVery Fast Field Oriented Control for Permanent Magnet Hysteresis Synchronous Motor
In this paper, a new field oriented control scheme with maximum torque for permanent magnet hysteresis synchronous (PMHS) motor has been presented. Vector control method provides significant improvement to the dynamic performance of ac motors but in this method d- axis current is controlled such as the ratio of motor torque to motor current is a maximum, then the dynamic performance will be ver...
متن کاملInvestigation of SLIM Dynamic Models Based on Vector Control for Railway Applications
Although, Single-Sided Linear Induction Motor (SLIM) utilization has increased in railway applications due to their numerous advantages in comparison to Rotational Induction Motors (RIM), there are some sophistication in their mathematical models and electrical drive. This paper focuses on the problems of SLIM modeling, with assuming end-effect on the basis of Field Oriented Control (FOC) as a ...
متن کامل