Application of Cross-Flow Electro-Microfiltration in Chromium Wastewater Treatment
نویسنده
چکیده
Cross-flow microfiltration (CFMF) was experimentaLLy studied for the separation of precipitates of chromium hydroxide. Although this process enables one to obtain chromium-free filtrate, a disadvantage is that the filtration flux declines rapidly due to membrane fouling. In order to avoid this fouling problem and increase the filtration flux, an electric field was applied across the membrane as an antifouling technique (cross-flow electro-microfiltration CFEMF). The surface charges of the precipitates were modified by adding a dispersant. The experimental results indicate that this modified process of CFEMF is highly.effective in reducing the membrane fouling, which eventually leads to a remarkable filtration flux increase. The application of this antifouling technique of CFEMF is cited only for the suspensions containing charged particles and colloids. Nevertheless, the process of modification of surface charge with a dispersant permits us to use this technique with a wide variety of suspensions.
منابع مشابه
Application of Iron Electrode in Textile Industry Wastewater Treatment Using Electro-fenton Technique: Experimental and Statistical Study
The application of synthetic colors in textile industries and their entry into the water and groundwater is an environmental problem because of being very toxic material. The synthetic colors which are used in textile dyeing (plyacrilic and polyester) are usually dispersing colorants. They derive the azo and anthraquinone chemicals. Electro-Fenton process is an efficient technique which can deg...
متن کاملApplication of microfiltration membrane for treatment of car wash effluent by Taguchi method prediction
In this study conditions of refinement of car wash effluent from Paniz station in omidiyeh, Khuzestan by microfiltration polyvinylidene fluoride (PVDF- MFB) membrane with pore size 0.13 micrometer by taguchi method was investigated. Taguchi method has been applied to investigate the effect of various operating parameters such as feed pressure at 3 levels (0.4, 0.7 and 1.00 bars), feed Flow rate...
متن کاملPerformance study of ceramic microfiltration membrane for oily wastewater treatment
Cross-flow microfiltration (MF) processes were studied with oily wastewater using a ceramic ( -Al2O3) membrane with 50 nm pore size. The nfluence of parameters such as transmembrane pressure (TMP), cross-flow velocity (CFV), oil concentration in feed, pH and salt concentration n the separation behaviors were investigated by the measurements of permeate flux, total organic carbon (TOC) removal e...
متن کاملTreatment of Tannery Wastewater by Various Oxidation and Combined Processes
A general overview on the prospective of various oxidation and combined processes in the treatment of tannery industry effluent are reported. Various oxidation and combined processes such as UV/H2O2/Hypochlorites, Fenton and Electro-oxidation, photo-chemical, photo-catalytic, electro-catalytic oxidation, wet air oxidation, ozonation, biological followed by ozone/UV/ H2O2, coagulation or electro...
متن کاملSeparation Properties of Wastewater Containing O/W Emulsion Using Ceramic Microfiltration/Ultrafiltration (MF/UF) Membranes
Washing systems using water soluble detergent are used in electrical and mechanical industries and the wastewater containing O/W emulsion are discharged from these systems. Membrane filtration has large potential for the efficient separation of O/W emulsion for reuses of treated water and detergent. The separation properties of O/W emulsions by cross-flow microfiltration and ultrafiltration wer...
متن کامل