Granular jet impingement on a fixed target.
نویسندگان
چکیده
In this work discrete element modeling (DEM) was applied to the flow of granular jets against a target. The resulting sheetlike or conelike formations under different conditions are described and explained by means of kinetic analysis. A qualitative and quantitative comparison with experimental results [Cheng, Phys. Rev. Lett. 93, 188001 (2007)] provides interesting insights in the theoretical treatment of the head-on collision of granular jets. Results presented in this paper provide a theoretical description of this type of physical system. However, there still exist obstacles in obtaining quantitative results.
منابع مشابه
Experimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model
Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...
متن کاملLDA Experimental Data of Three-Poster Jet Impingement System
During its near-ground hovering phase a Short Take-Off and Vertical Landing (STOVL) aircraft creates a complex three-dimensional flow field between jet streams, the airframe surface and the ground. A proper understanding and numerical prediction of this flow is important in the design of such aircraft. In this paper an experimental facility, used to gather validation data suitable for testing C...
متن کاملNumerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders
A numerical study has been carried out for slot air jet impingement cooling of horizontal concentric circular cylinders. The slot air jet is situated at the symmetry line of a horizontal cylinder along the gravity vector and impinges on the bottom of the outer cylinder which is designated as θ=0°. The outer cylinder is partially opened at the top with a width of W=30mm and is kept at constant t...
متن کاملThermal Performance of Jet Impingement with Spent Flow Management
The present study proposes novel micro-jet impingement heat sink with effusion holes for flow extraction. The design consists of impingement nozzles surrounded by multiple effusion holes to take away the spent fluid. A three-dimensional numerical model is used for steady, incompressible, laminar flow and conjugate heat transfer for the performance analysis of the proposed design. The computatio...
متن کاملImproving Cyclone Efficiency by Recycle and Jet Impingement Streams
In this paper a new process is presented for improving efficiency of cyclone de-dusting systems. The cyclone is coupled with a specially designed cylindrical chamber which includes a rotating tube inside it with air impinging nuzzles, drilled on the peripheral surface of the tube. The nuzzles help in pushing and throwing the particles to the outer radius distances during downward flow of du...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review. E, Statistical, nonlinear, and soft matter physics
دوره 82 3 Pt 1 شماره
صفحات -
تاریخ انتشار 2010