Optical properties of parylene and its use as substrate in beam splitters.
نویسندگان
چکیده
The optical properties of a commercial parylene pellicle are obtained using a classical oscillator model with a single oscillator. Using a standard design antireflection stack and beam-splitter multilayer films coated on this pellicle, its performance is greatly improved, flattening the curve and increasing its useful spectral range.
منابع مشابه
OPTICAL PROPERTIES OF THIN Cu FILMS AS A FUNCTION OF SUBSTRATE TEMPERATURE
Copper films (250 nm) deposited on glass substrates, at different substrate temperatures. Their optical properties were measured by ellipsometery (single wavelength of 589.3 nm) and spectrophotometery in the spectral range of 200–2600 nm. Kramers Kronig method was used for the analysis of the reflectivity curves of Cu films to obtain the optical constants of the films, while ellipsometery measu...
متن کاملEffect of Thickness on Structural and Morphological Properties of AlN Films Prepared Using Single Ion Beam Sputtering
Aluminum nitride (AlN) thin films have potential applications in microelectronic and optoelectronic devices. In this study, AlN thin films with different thicknesses were deposited on silicon substrate by single ion beam sputtering method. The X-ray diffraction (XRD) spectra revealed that the structure of films with thickness of - nm was amorphous, while the polycrystalline hexagonal AlN with a...
متن کاملThermal Annealing Influence over Optical Properties of Thermally Evaporated SnS/CdS Bilayer Thin Films
Thin films of tin sulfide/cadmium sulfide (SnS/CdS) were prepared bythermal evaporation method at room temperature on a glass substrate and then annealedat different temperature with the aim of optimizing the optical properties of the materialfor use in photovoltaic solar cell devices. The effect of annealing on optical propertiesof SnS/CdS film was studied in the temper...
متن کاملLarge Core Planar 1 x 2 Optical Power Splitter with Acrylate and Epoxy Resin Waveguides on Polydimetylsiloxane Substrate
Fabrication process of multimode 1 x 2 optical rectangular planar power splitter suitable for low-cost short distance optical network is presented. The splitters were designed by beam propagation method for standard input/output plastic optical fibre. Materials used for the splitter were: UV acrylate photopolymer polymer or epoxy resin for optical core waveguide layers and Y-groove substrate fo...
متن کاملSimulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 30 19 شماره
صفحات -
تاریخ انتشار 1991