Production of ring-like structure in the cocoon of Hercules A

نویسندگان

  • Curtis J. Saxton
  • Geoffrey V. Bicknell
چکیده

The radio lobes of the radio galaxy Hercules A contain intriguing ring-like structures concentric with the jet axis. To investigate the occurrence of such features, we have used hydrodynamic simulations of jets with a range of Mach numbers (fromM = 2 to 50) and densities (down to a ratio of 10 relative to the background) to generate ray-traced images simulating synchrotron emission from the time-dependent shock structures. We compare these images with observations of Hercules A, and consider the physical nature and temporal evolution of the most plausible configurations. We find that the observed ring-like structures are well explained as nearly annular shocks propagating in the backflow surrounding the jet. We infer that the jet is oriented at between 30 and 70 to the line of sight, consistent with radio depolarisation observations of Gizani & Leahy. The observational lack of hot-spots at the extremities of the radio lobes, and the possible presence of a buried hot-spot near the base of the western lobe, are explained in terms of the intrinsic brightness fluctuations and dynamics of the terminal shock of an ultra-light, low Mach number jet that surges along its axis due to intermittent pinching and obstruction by turbulent backflow in the cocoon. We conclude from the appearance of both sides of the Hercules A, that both jets are on the borderline of becoming fully turbulent. Subject headings: hydrodynamics — galaxies: active — galaxies: individual (Hercules A; 3C 348) — galaxies: jets — radio continuum: galaxies — X-rays: galaxies Department of Physics & Theoretical Physics, Faculty of Science, Australian National University, ACT 0200, Australia Research School of Astronomy & Astrophysics, Mt Stromlo Observatory, Australian National University, Cotter Road, Weston ACT 2611, Australia

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Calculating Magnetic Permeability Response of a Conducting Square Ring Structure

In the present work, we investigate the tunability of the magnetic response of a new structure. A lattice of periodically arranged close-packed square conducting rings has been studied for this purpose. Here, instead of enhancing the magnetic activity via resonance, like in split-ring resonators, we concentrate on the analysis of the interactions between these rings. The core idea is to design ...

متن کامل

Effect of 12-hours delay and anticipation from traditional practice in silkworm mounting to spinning frames on economic traits of Bombyx mori (Lepidoptera: Bombycidae) cocoons

In this study, the aim was to determine the effect of 12 hours delay and time advancement of Bombyx mori larvae transfer to spinning frames on the economic traits of harvested cocoons. Our experience focused on the transfer of three lots of silkworm mature larvae to cocoon frames with 12 hours delay or advancement from usual spinning time. Commercial silkworm eggs were obtained and thr...

متن کامل

تأثیر شاخص انتخاب در لاین‌های والد بر مقاومت آمیخته‌های کرم ابریشم به ویروس پلی‌هیدروسیس هسته‌ای

This experiment was conducted to determine the effect of selection index in four iranian commercial silkworm lines (107, 110, 153, 154) on resistance of their hybrids including 107×110, 110×107, 153×154, 154×153 under stress of nuclear polyhedrosis virus (N.P.V) Infection. Selection index program was performed on 3P commercial lines during 9 generations. Later generation parents of 3P lines wer...

متن کامل

Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes

Nowadays, tube bonding in vehicles structure is noticeably considered by many researches. In this paper, local tube compression process by a rubber ring has been studied. Firstly, simulation of the process was performed by FEM. Then, experimental test has been carried out to validate the numerical results. Numerical and experimental results were compared showing a good agreement. In the second ...

متن کامل

Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes

Nowadays, tube bonding in vehicles structure is noticeably considered by many researches. In this paper, local tube compression process by a rubber ring has been studied. Firstly, simulation of the process was performed by FEM. Then, experimental test has been carried out to validate the numerical results. Numerical and experimental results were compared showing a good agreement. In the second ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002