Modeling the Dispersion and Evaporation of Sprays in Aeronautical Combustion Chambers
ثبت نشده
چکیده
منابع مشابه
Three Dimensional Modeling of Combustion Process and Emissions Formationin Pre and Main Chambers of an Idirect Injection Diesel Enginge
The combustion processes and emission formation in pre and main chambers of a Lister 8.1 IDI diesel are simulated with the Computational Fluid Dynamics (CFD) code. The model includes spray atomization, mixture formation and distribution and subsequently the combustion processes and emissions formation modeling are carried out with considering of flow configurations in two chambers. A part load ...
متن کاملDirect Numerical Simulation of Sprays: Turbulent Dispersion, Evaporation and Combustion
Numerical procedures to describe the dispersion, evaporation and combustion of a polydisperse liquid fuel in a turbulent oxidizer are presented. Direct Numerical Simulation (DNS) allows one to describe accurately the evolution of the fully compressible gas-phase coupled with a Lagrangian description in order to describe two-phase flows. Standard coupling is used for the Eulerian/Lagrangian syst...
متن کاملEffects of primary breakup modeling on spray and combustion characteristics of compression ignition engines
0010-2180/$ see front matter 2010 The Combust doi:10.1016/j.combustflame.2010.02.018 * Corresponding author. Address: University of Illin Mechanical & Industrial Engineering, 842 West Tayl 7022, USA. Fax: +1 312 413 0441. E-mail address: [email protected] (S.K. Aggarwal). Injector flow dynamics and primary breakup processes are known to play a pivotal role in determining combustion and emissions in d...
متن کاملThree-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine
This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...
متن کاملاحتراق ذرات سوخت زیستتوده در یک واحد تولید همزمان توان و حرارت مقیاس کوچک
Increasing energy cost and reduction of fossil fuel resources have been resulted in increasing demand of renewable energy, such as micro biomass particles in small scale Stirling engines to generate combined heat and power. In such Stirling engines, biomass particles are burnt in external combustion chamber and then, the generated heat is transferred to the working fluid of the engine cycle. Th...
متن کامل