Mesoporous nanowire array architecture of manganese dioxide for electrochemical capacitor applications.
نویسندگان
چکیده
Mesoporous MnO(2) nanowire array architecture exhibits enhanced capacitive and charge/discharge performance for electrochemical capacitors.
منابع مشابه
1. Lithographically Patterned Gold/Manganese Dioxide Core/Shell Nanowires for High Power Supercapacitors – Electrochemical and Raman Spectroscopic Characterization
MnO2 is the most investigated transition metal oxide electrode material for supercapaitor applications because of its intriguing features including natural abundance, low cost, and high theoretical specific capacitance (1370 F g−1). The theoretical specific capacitance has rarely been achieved in bulk MnO2 limited by the poor electrical conductivity and limited surface area. Hence there is a ra...
متن کاملHigh Rate Performance Nanocomposite Electrode of Mesoporous Manganese Dioxide/Silver Nanowires in KI Electrolytes
In recent years, manganese dioxide has become a research hotspot as an electrode material because of its low price. However, it has also become an obstacle to industrialization due to its low ratio of capacitance and the low rate performance which is caused by the poor electrical conductivity. In this study, a KI solution with electrochemical activity was innovatively applied to the electrolyte...
متن کاملMesoporous Hydrous Manganese Dioxide Nanowall Arrays with Large Lithium Ion Energy Storage Capacities
Novel nanowall arrays of hydrous manganese dioxide MnO2 0.5H2O are deposited onto cathodic substrates by the potentiostatic method from a mixed aqueous solution of manganese acetate and sodium sulfate. The deposition is induced by a change of local pH resulting from electrolysis of H2O, and hierarchical mesoporous nanowall arrays are formed as a result of simultaneous precipitation of manganese...
متن کاملHigher-power supercapacitor electrodes based on mesoporous manganese oxide coating on vertically aligned carbon nanofibers.
A study on the development of high-power supercapacitor materials based on formation of thick mesoporous MnO2 shells on a highly conductive 3D template using vertically aligned carbon nanofibers (VACNFs). Coaxial manganese shells of 100 to 600 nm nominal thicknesses are sputter-coated on VACNFs and then electrochemically oxidized into rose-petal-like mesoporous MnO2 structure. Such a 3D MnO2/VA...
متن کاملElectrodeposition of Manganese-Nickel Oxide Films on a Graphite Sheet for Electrochemical Capacitor Applications
Manganese-nickel (Mn-Ni) oxide films were electrodeposited on a graphite sheet in a bath consisting of manganese acetate and nickel chloride, and the structural, morphological, and electrochemical properties of these films were investigated. The electrodeposited Mn-Ni oxide films had porous structures covered with nanofibers. The X-ray diffractometer pattern revealed the presence of separate ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 48 شماره
صفحات -
تاریخ انتشار 2009