The importance of water quality and haemodialysis fluid composition.
نویسندگان
چکیده
Treatment of renal failure by haemodialysis uses dialysis fluid to facilitate the normalization of electrolyte and acid base abnormalities and the removal of low molecular weight uraemic compounds present in the plasma such as urea. The dialysis fluid is a continuously produced blend of treated tap water and a concentrated solution containing electrolytes, buffer, and glucose. The water used originates as drinking water but undergoes additional treatment. Recent surveys have indicated that the chemical and microbiological content of such water frequently fails to meet the requirements of established standards, and its bacterial content arising from the presence of a biofilm in the water distribution network or the hydraulic circuit of the dialysis machine is a contributory factor to the chronic inflammatory state in patients undergoing regular dialysis. The composition of the dialysis fluid plays an important role in the modulation of complications associated with end-stage renal disease, as well as those associated with the treatment itself. The avoidance of complications arising from water contaminants requires a constant and vigorous attention to water quality, whilst with the composition of electrolytes and buffer there is a trend towards greater individualization to provide a high degree of treatment tolerance.
منابع مشابه
Importance of whole-body bioimpedance spectroscopy for the management of fluid balance.
INTRODUCTION Achieving normohydration remains a non-trivial issue in haemodialysis therapy. Preventing the deleterious effects of fluid overload and dehydration is difficult to achieve. Objective and clinically applicable methods for the determination of a target representing normohydration are needed. METHODS Whole-body bioimpedance spectroscopy (50 frequencies, 5-1,000 kHz) in combination w...
متن کاملQuality assurance for dialysis-quality water and dialysis fluid. Guidelines for the control of chlorine and chloramine in water for haemodialysis using activated carbon filtration.
متن کامل
A new approach to enhance final surface quality in drilling operation: evaluation of using alumina micro-particle additives on oil-water emulsion cutting fluid
Reaming is a common finishing process for improving the drilled holes surface quality. Choosing an appropriate finishing method in drilling process has a significant effect on the surface quality of holes and in decreasing the process total cost and time. In this study, four similar holes were drilled on the AISI 4340 workpiece with different two pair feed rates. The drilling process was perfor...
متن کاملExperimental and Simulation Constructing of Phase Diagram and Quality Lines for a Lean Gas Condensate Reservoir Fluid
Constructing phase diagram and its subsequent quality lines for lean gas condensate reservoirs is always crucial and challenging topic in reservoir fluid studies. Due to small amounts of liquid drop-outs in lean gas condensates at reservoir conditions, full experimental tracking of phase diagram and its relevant quality lines is almost impossible for lean gas condensates.On the other hand, ...
متن کاملFatty Acid Composition of Human Follicular Fluid Phospholipids and Fertilization Rate in Assisted Reproductive Techniques
Background: Fatty acids are known to be critically important in multiple biological functions. Phospholipid fatty acids of follicular fluid, an important microenvironment for the development of oocytes, may contribute to the women’s fertility and the efficacy of assisted reproduction techniques. The aim of this study was to investigate the effect of fatty acid composition of follicular fluid ph...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Blood purification
دوره 24 1 شماره
صفحات -
تاریخ انتشار 2006