Journal of Solid Mechanics Vol
نویسنده
چکیده
Present paper is devoted to stress and deformation analyses of heated variable thickness functionally graded (FG) circular plate with clamped supported, embedded on a gradient elastic foundation and subjected to non-uniform transverse load. The plate is coupled by an elastic medium which is simulated as a WinklerPasternak foundation with gradient coefficients in the radial and circumferential directions during the plate deformation. The temperature distribution is assumed to be a function of the thickness direction. The governing state equations are derived in terms of displacements and temperature based on the 3D theory of thermo-elasticity. These equations are solved using a semianalytical method to evaluate the deformation and stress components in the plate. Material properties of the plate except the Poisson's ratio are assumed to be graded continuously along the thickness direction according to an exponential distribution. A parametric study is accomplished to evaluate the effects of material heterogeneity indices, foundation parameters, temperature difference between the top and bottom surfaces of the plate and thickness to radius ratio on displacements and stresses. The results are reported for the first time and the new results can be used as a benchmark solution for the future researches. © 2017 IAU, Arak Branch. All rights reserved.
منابع مشابه
A Study of Na/K Feldspar Solid Solution Using Statistical Mechanics
Thermal behavior of various solid feldspars are different, namely those of bivalent cations show no change in the distribution of Al and Si atoms, whereas feldspars of univalent cations become more disordered with raising temperature. In the latter case Al atoms migrate from the sites they occupe at low temperatures and interchange positions with the Si atoms. At high temperatures (but stil...
متن کاملAnalysis of the Casing Collapse in Terms of Geomechanical Parameters and Solid Mechanics
Casing collapse is one of the major problems in oil fields, imposing a lot of costs on oil companies. This problem occurs not only at drilling times in some formations but also after the completion and production can lead to many problems. Analysis of the behavior of casing collapse in terms of geo-mechanics and solid mechanics could significantly meet the needs of the oil industry of Iran. In ...
متن کاملFinite Element Simulation of Contact Mechanics of Cancer Cells in Manipulation Based on Atomic Force Microscopy
The theory of contact mechanics deals with stresses and deformations which arise when the surfaces of two solid bodies are brought into contact. In elastic deformation contact occurs over a finite area. A regular method for determining the dimensions of this area is Hertz Contact Model. Appearance of atomic force microscope results in introduction of Contact ...
متن کاملAnalysis of Viscoelastic Functionally Graded Sandwich Plates with CNT Reinforced Composite Face Sheets on Viscoelastic Foundation
In this article, bending, buckling, and free vibration of viscoelastic sandwich plate with carbon nanotubes reinforced composite facesheets and an isotropic homogeneous core on viscoelastic foundation are presented using a new first order shear deformation theory. According to this theory, the number of unknown’s parameters and governing equations are reduced and also the using of shear correct...
متن کاملLongitudinal-Torsional and Two Plane Transverse Vibrations of a Composite Timoshenko Rotor
In this paper, two kinds of vibrations are considered for a composite Timoshenko rotor: longitudinal-torsional vibration and two plane transverse one. The kinetic and potential energies and virtual work due to the gyroscopic effects are calculated and the set of six governing equations and boundary conditions are derived using Hamilton principle. Differential quadrature method (DQM) is used as ...
متن کاملVibration Analysis of Multi-Step Bernoulli-Euler and Timoshenko Beams Carrying Concentrated Masses
In this paper, vibration analysis of multiple-stepped Bernoulli-Euler and Timoshenko beams carrying point masses is presented analytically for various boundary conditions. Each attached element is considered to have both translational and rotational inertias. The method of solution is “transfer matrix method” which is based on the changes in the vibration modes at the vicinity of any discontinu...
متن کامل