Dielectric Hardening Method of Sandmixes Containing Hydrated Sodium Silicate
نویسنده
چکیده
M. Stachowicz, K. Granat, D. Nowak. Wroclaw University of Technology, Wroclav, Poland The subjec t-matter of the paper c overs a v ery topical problem of possible r estriction of shor tcomings like poor knocking-out properties of castings and hard reclaimability of this type sandmixes by proper selecting their components and using innovative microwave heating. It was proved that the sandmixes subject to quick dielectric process of dr ying/hardening show signifi cantly lower residual strength, which g ives this method priorit y over traditional energy-consuming processes of casting core manufacture.
منابع مشابه
The effect of titanium dioxide and molybdenum oxide on the properties of sodium potassium niobate piezoceramic
Sodium potassium niobate piezoceramics are considered as lead-free piezoelectric due to their good properties. In this study, the effect of titanium dioxide and molybdenum oxide as dopant on the densification behavior, piezoelectric and dielectric properties of lithium doped sodium potassium niobate ((K0.5Na0.5)0.94Li0.06NbO3, KNNL) was investigated. For this purpose, (K0.5Na0.5)0.94Li0.06Nb0.9...
متن کاملTailoring the strength and porosity of rapid-hardening magnesia phosphate paste via the pre-foaming method
High-porosity magnesia phosphate paste (HPMPP) was prepared via the pre-foaming method. In the pre-foaming method, sintering treatment was not required. The bulk density and maximum compressive strength of the HPMPP prepared according to the ratio of water to solids (W/So) of 0.32 reached 464.00 ± 5.00 Kg/m(3) and 0.30 ± 0.05 MPa, respectively. The compressive strength increased with the increa...
متن کاملPreparation of Silica by Alkaline-Heating and Precipitation Method from Corn Straw Ash
The preparation of silica by an alkaline-heating and precipitation method from corn straw ash (CSA) obtained from a biomass power plant was the focus of this study. Sodium hydroxide was used as the silica extraction reagent, and H2SO4 was the precipitator. The concentration of sodium hydroxide solution was confirmed to have a significant influence on the production of sodium silicate from CSA. ...
متن کاملMolecular silicate and aluminate species in anhydrous and hydrated cements.
The compositions and molecular structures of anhydrous and hydrated cements are established by using advanced solid-state nuclear magnetic resonance (NMR) spectroscopy methods to distinguish among different molecular species and changes that occur as a result of cement hydration and setting. One- and two-dimensional (2D) solid-state (29)Si and (27)Al magic-angle spinning NMR methodologies, incl...
متن کاملFinal Report of the Cosmetic Ingredient Review Expert Panel Safety Assessment of Silica and Related Cosmetic Ingredients
This is a safety assessment of silica and the related cosmetic ingredients: alumina magnesium metasilicate, aluminum calcium sodium silicate, aluminum iron silicates, hydrated silica, and sodium potassium aluminum silicate. These ingredients are synthetic amorphous silicas and silicates; crystalline silica is not a cosmetic ingredient and is not used in cosmetics. These ingredients are used as ...
متن کامل