Analysis of a New Reduced Switch Nine Level Inverter
نویسندگان
چکیده
The multi level inverter system is mostly used in ac drives, when both reduced harmonic contents and high power are required. In this paper a new topology of multilevel inverter is introduced. This type has many steps with less power electronic switches. Due to the less number of switches the cost of the inverter is very less and also less installation area is required. Firstly, we describe briefly the structural parts of the inverter then switching strategy and operational principles of the proposed inverter are explained and operational topologies are given. Simulation is performed using MATLAB SIMULINK. Various PWM techniques are applied to the circuit such as PDPWM, PODPWM, APODPWM, VFPWM and COPWM. By comparing among the PWM techniques, PODPWM provide the less THD value and COPWM provide a higher fundamental RMS output voltage.
منابع مشابه
An Improved Control Approach for Dual Mechanical Coupled BLDC Motor With Nine-Switch Inverter
This paper presents the control approach for single inverter dual coupled brushless DC motors (DCBLDC) drive system. One of the basic requirements of such systems, is the power balance between two motors and on the other hand, minimizing mechanical fluctuations in order to avoid mechanical equipment damage especially in the state of mechanical resonance. This paper also presents an improved for...
متن کاملDual Z-Source Network Dual-Input Dual-Output Inverter
This paper presents a modified nine switch inverter with two inputs and two Z-source networks. This inverter has two DC inputs and two AC outputs. Input DC voltages can be boosted to the required level. Amplitude, frequency and phase of AC output voltages can be controlled, independently. The proposed converter can be used in applications with two unregulated DC sources, which require feeding ...
متن کاملDesign and Implementation of a New Switch-Diode based Single Source Multilevel Inverter Topology
Multilevel inverters are a new generation of DC-AC converters at medium and high voltage and power levels. These converters have made great strides in the use of industrial applications compared to conventional two-level inverters due to lower harmonic distortion, filter size, EMI and dv/dt. Besides these merits, some disadvantages can be mentioned such as more power electronics devices and com...
متن کاملModular Multilevel Current Source Inverter Using Two-Switch Basic Units
This article is an introduction of a new topology of current source inverter (CSI) which can be alternatively implemented in low/medium power applications. This configuration is organized from series connected sub-multilevel inverters blocks. The basis of the recommended multilevel topology is the connections of many cell units in a decent scheme with the help of H-bridge inverter. The suggeste...
متن کاملSensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives
The sensorless model predictive force control (SMPFC) is a strong method for controlling the drives of three-phase 4(6)-switch inverter linear induction motors. This kind of inverter can be employed for fault tolerant control in order to solve the problem of open/short circuit in 6-switch inverters (B6). This paper proposed a method for the SMPFC of a linear induction motor (LIM) with a 4-switc...
متن کاملA New Single-phase Symmetrical Cascade Multilevel Inverter with Low Number of Power Switches
In this paper a new 5-level single phase symmetrical cascade multi-level inverter is proposed. The proposed topology contains combination of unidirectional and bidirectional power switches based on output voltage level number. The number of power switches and withstanding voltage of powers witches were reduced related to the other topologies. This configuration can be extended to the n-level in...
متن کامل