Polymeric Pseudo-Liquid Membranes from Poly(N-oleylacrylamide)

نویسندگان

  • Hiroko Shiono
  • Masakazu Yoshikawa
چکیده

A polymeric pseudo-liquid membrane (PPLM) was constructed from poly(N-oleylacrylamide) (PC18AAm), which exhibited a rubbery state under membrane transport conditions and used as the membrane matrix. In the present study, dibenzo-18-crown-6 (DB18C6) and dibenzo-21-crown-7 (DB21C7) were adopted as transporters for alkali metal ions. KCl was adopted as a model substrate for DB18C6 and CsCl the latter. Chiral transporter, O-allyl-N-(9-anthracenylmethyl)cinchonidinium bromide (AAMC) was used as a transporter for chiral separation of a racemic mixture of phenylglycine (Phegly). The l-somer was transported in preference to the antipode. The present study revealed that PPLMs are applicable to membrane transport, such as metal ion transport and chiral separation.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of nano Zinc Oxide on gas permeation through mixed matrix poly (Amide-6-b-Ethylene Oxide)-based membranes

Poly (amide-6-b-ethylene oxide)/Zinc Oxide (PEBA/ZnO) mixed matrix membranes were fabricated using ethanol/water as solvent by solvent casting method. The concentration of ZnO in membrane was set to 0.1 wt.% and the synthesized membranes were characterized by AFM and FTIR. Effects of ZnO nanoparticle on CO2, CH4 and N2 permeabilities, and CO2/N2<...

متن کامل

Effect of nano Zinc Oxide on gas permeation through mixed matrix poly (Amide-6-b-Ethylene Oxide)-based membranes

Poly (amide-6-b-ethylene oxide)/Zinc Oxide (PEBA/ZnO) mixed matrix membranes were fabricated using ethanol/water as solvent by solvent casting method. The concentration of ZnO in membrane was set to 0.1 wt.% and the synthesized membranes were characterized by AFM and FTIR. Effects of ZnO nanoparticle on CO2, CH4 and N2 permeabilities, and CO2/N2<...

متن کامل

Mechanistic Modeling of Organic Compounds Separation from Water via Polymeric Membranes

A mathematical model considering mass and momentum transfer was developed for simulation of ethanol dewatering via pervaporation process. The process involves removal of water from a water/ethanol liquid mixture using a dense polymeric membrane. The model domain was divided into two compartments including feed and membrane. For a description of water transport in ...

متن کامل

Removal of Dilute Benzene in Water through Ionic Liquid/Poly(Vinyl Chloride) Membranes by Pervaporation

This paper focuses on the effects of the addition of an ionic liquid, 1-Allyl-3-butylimidazilium bis(trifluoromethane sulfonyl)imide ([ABIM]TFSI), which has a high affinity for benzene, into the poly(vinyl chloride) (PVC) membrane on the pervaporation characteristics of the removal of benzene from aqueous solutions of dilute benzene. When aqueous solutions of 100~500 ppm benzene were permeated ...

متن کامل

Tailoring the Characteristics of Poly (phenylene-ether-ether) sulfone Membrane for Efficient Glycerol/Biodiesel Separation

Poly (phenylene-ether-ether) sulfone membrane was fabricated and characterized by efficient glycerol/biodiesel separation produced from waste cooking oils trans-esterification. The membrane preparation was processed by phase inversion technique. The morphology, Physico-chemical properties and separation behavior of membranes were studied at various PPEES concentration. A uniform surface was...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2014