SOL and pedestal density profile evolution during DIII-D ELMy and ELM-suppressed H-mode operation

نویسندگان

  • L. Zeng
  • G. Wang
  • W. A. Peebles
چکیده

A fast profile reflectometer has been used to study the detailed characteristics of scrape-off-layer (SOL) and pedestal density profile evolution in DIII-D ELMy H-mode plasmas with high temporal (P10 ls) and spatial ( 4 mm) resolution. Results show a significant enhancement in radial particle transport to the outer vessel wall during Type-I ELMs. The radial particle transport time ( 140 ls) becomes comparable to the parallel transport time, as a result of a high radial velocity ( 620 m/s) of SOL profile expansion. The dynamics can vary from ELM-to-ELM. Scalings with pedestal density have been obtained, indicating that ELM is less affected as the pedestal density increases. Finally, during ELMsuppressed H-mode operation with a stochastic magnetic boundary, the radial extent of observed SOL profile modifications do not extend to the vessel wall, and profiles are steeper, substantially different from the SOL changes associated with Type-I ELMs. 2004 Elsevier B.V. All rights reserved. PACS: 52.40.HF; 52.55.Fa; 52.65. y; 52.70. m

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Divertor heat loads in RMP ELM controlled H-mode plasmas on DIII-D

In this paper the manipulation of power deposition on divertor targets at DIII-D by application of resonant magnetic perturbations (RMPs) is analysed. It has been found that heat transport shows a different reaction to the applied RMP depending on the plasma pedestal collisionality. At pedestal electron collisionality above 0.5 the heat flux during the ELM suppressed phase is of the same order ...

متن کامل

Initial results of H-mode edge pedestal turbulence evolution with quadrature reflectometer measurements on DIII-D

High-resolution quadrature reflectometer measurements of density fluctuation levels have been obtained on DIII-D for H-mode edge pedestal studies. Initial results are presented from the L–H transition to the first ELM for two cases: (i) a low pedestal beta discharge, in which density turbulence in the pedestal has little change during the ELM-free phase, and (ii) a high pedestal beta discharge ...

متن کامل

Transport of Elm Energy and Particles into the Sol and Divertor of Diii–d

We report on DIII–D data that reveal the underlying processes responsible for transport of energy and particles from the edge pedestal to the divertor target during Type I edge-localized modes (ELMs). The separate convective and conductive transport of energy due to an ELM is determined by Thomson scattering measurements of electron density and temperature in the pedestal. Conductive transport ...

متن کامل

ELM triggering conditions for the integrated modeling of H-mode plasmas

Recent advances in the integrated modeling of ELMy H-mode plasmas are presented. A model for the H-mode pedestal and for the triggering of ELMs predicts the height, width, and shape of the H-mode pedestal and the frequency and width of ELMs. Formation of the pedestal and the L-H transition is the direct result of ~ Er × ~ B flow shear suppression of anomalous transport. The periodic ELM crashes...

متن کامل

Role of Transport and MHD Stability in Simulations of H-mode Pedestal Development in ELMy Plasmas

This study addresses the development of a scaling of the H-mode pedestal in tokamak plasmas with type I ELMs. In particular, the scaling studies carried out illustrate the dependence of the pedestal properties and the resulting divertor heat load width as a function of plasma elongation and plasma current. H-mode pedestal profiles for DIII-D and Alcator C-Mod tokamaks are considered: DIII-D for...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005