Fundamental Principles of Heat - Treating Steels
نویسنده
چکیده
eat-treating is a process that is critical to the fabrication of steel fasteners. It is a necessary process in order to achieve the mechanical properties. Heat-treating is typically conduc t ed a f t e r t he fo rming processes and before any coating or finishing processes. Heat-treating may be done by the manufacturer or outsourced to a commercial shop. The equipment necessary to effect ively heat t reat s teel fasteners includes well controlled furnaces with temperature control, atmosphere control, quenching tanks, and cleaning equipment.
منابع مشابه
The Effect of Ferrite Grain Size on the Fatigue Behavior of Ferrite-martensite Dual-phase Steels
The effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volume fraction of martensite (Vm) under different heat treatments was investigated. The heat treatments were homogenized at 1200 oC along with several subsequent normalizations at 910 oC, resulting in different microstructures and mechanical properties. After heat treatment, the obtained ste...
متن کاملEffect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels
In this study, the effect of welding heat input on microstructure and mechanical properties of dissimilar joints of API-X42 and API-B pipeline steels was investigated. Evaluation of the microstructures showed that increasing the welding heat input decreased acicular ferrite in weld metal microstructure, while amount of Widmanstatten ferrite, polygonal ferrite and grain boundary ferrite increase...
متن کاملStructural, Chemical and Deformation Changes in Friction Welded Joint of Dissimilar Steels
N. Ratković, Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia. R. Nikolić, Faculty of Civil Engineering, University of Žilina, Žilina, Slovakia. I. Samardžić, University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia. Fundamental principles of friction welding of dissimilar steels (high speed and tempering steel) from the aspect of metallurgical and che...
متن کاملTHE OXIDATION RESISTANCE OF HIGH ALUMINUM HEAT RESISTANT STEELS
Abstract: In this research, the oxidation behaviour of high Aluminum heat resistant steel (%25Cr,%20Ni,%8Al) hasbeen evaluated at the temperature range of (1000-1300ºC).The results showed that there was no countinous healinglayer on the surface of the alloy when Al increased up to %5.5 and the oxidation resistance of steel decreased due toformation of spinel oxides on the surface.By increasing ...
متن کاملApplication of Polymeric Quenchants in Heat Treatment of Steels
Aqueous polymer quenchants are being used increasingly in steel heat treatment industries as a substitution for conventional quenchants. By adjusting the quench parameters of the polymeric media, it is possible to achieve desirable microstructure and mechanical properties in addition to reduction in distortion and cracking. In this work, Polyalkylene Glycol (PAG) aqueous solution was used as th...
متن کامل