Improved NEPA Substations On-Line Monitoring Technology Using Optical Fiber Sensors

نویسنده

  • M. A. Omidiora
چکیده

Condition monitoring of power substations is a significant issue for the National Electric Power Authority (NEPA) of Nigeria. Current methods for monitoring the condition of high voltage equipment are time consuming and often inaccurate, therefore causing catastrophic damage to the substation equipment. Recent research has demonstrated the efficacy of employing optical fiber sensors in condition monitoring of substation equipment. These sensors enhance the current monitoring method and facilitate faster responses to equipment problems. This paper briefly reviews the state of the arts, but is primarily devoted to a discussion of the new approach and future directions in condition monitoring of NEPA substation equipment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Weight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)

The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...

متن کامل

Fiber-Optic Current and Voltage Sensors for High-Voltage Substations

We report on ABB’s fiber-optic current and voltage transducers and their applications in high-voltage substations. We consider bulk-optics and all-fiber current sensors and voltage sensors that exploit the electro-optic effect in BGO and the piezo-electric effect in quartz.

متن کامل

Optical fiber sensors for spacecraft applications

Optical fiber sensors offer a number of advantages for spacecraft applications. A principal application is strain sensing for structural health monitoring, shape determination, and spacecraft qualification testing. This paper will review the results of recent work at the Naval Research Laboratory where optical fiber strain sensors have been used on spacecraft structures and ground test hardware...

متن کامل

Multiplexed Strain Monitoring of Composite Structures Using Fiber Bragg Grating Sensors

In this paper, we present an improved FBG sensor system using a wavelength swept fiber laser(WSFL) for internal strain monitoring of composite laminates. The WSFL provides unique and functional output characteristics useful for sensor interrogation. In addition a realtime signal processing program was made to measure strains. Five FBG sensors in an optical fiber were used to measure internal st...

متن کامل

Development of Fiber Bragg Grating Sensor System Using Wavelength-swept Fiber Laser

Fiber Bragg grating (FBG) sensors based on the wavelength division multiplexing technology are ideally suited for structural health monitoring. In many applications, it is desirable to form several arrays of optical fiber sensors to monitor the response of structures. In the present study, we constructed an improved FBG sensor system using a wavelength-swept fiber laser which exhibits high outp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003