High efficiency and low absorption Fresnel compound zone plates for hard X-ray focusing
نویسندگان
چکیده
Circular and linear zone plates have been fabricated on the surface of silicon crystals for the energy of 8 keV by electron beam lithography and deep ion plasma etching methods. Various variants of compound zone plates with first, second, third diffraction orders have been made. The zone relief height is about 10 mkm, the outermost zone width of the zone plate is 0.4 mkm. The experimental testing of the zone plates has been conducted on SPring-8 and ESRF synchrotron radiation sources. A focused spot size and diffraction efficiency measured by knife-edge scanning are accordingly 0.5 mkm and 39% for the first order circular zone plate.
منابع مشابه
Sharp-focusing Bragg-Fresnel zone plate with Laue diffraction geometry.
The impact of decreased zone height on the focal properties of hard X-ray Bragg-Fresnel zone plates has been studied by numerical simulation. Decreased zone height allows for smaller zone widths and, although the efficiency of the lens is decreased, the signal-to-background ratio in the focal plane of the lens remains at a comparatively high level. This is distinct from an analogous case of ord...
متن کاملUltra-high resolution zone-doubled diffractive X-ray optics for the multi-keV regime.
X-ray microscopy based on Fresnel zone plates is a powerful technique for sub-100 nm resolution imaging of biological and inorganic materials. Here, we report on the modeling, fabrication and characterization of zone-doubled Fresnel zone plates for the multi-keV regime (4-12 keV). We demonstrate unprecedented spatial resolution by resolving 15 nm lines and spaces in scanning transmission X-ray ...
متن کاملFabrication of Fresnel zone plates for hard X-rays
A method to fabricate gold structures with high aspect ratio is presented. Fresnel zone plates with an outermost zone width of 100 nm and structures of 1 lm height are fabricated. Preliminary focusing results at an X-ray energy of 8 keV are presented and ways to improve the zone plate parameters are discussed. 2007 Elsevier B.V. All rights reserved.
متن کاملHigh-efficiency Fresnel zone plates for hard X-rays by 100 keV e-beam lithography and electroplating
The fabrication and characterization of Fresnel zone plates (FZPs) for hard X-ray microscopy applications are reported. High-quality 500 nm- and 1 µm-thick Au FZPs with outermost zone widths down to 50 nm and 70 nm, respectively, and with diameters up to 600 µm were fabricated. The diffraction efficiencies of the fabricated FZPs were measured for a wide range of X-ray energies (2.8-13.2 keV) sh...
متن کامل3-D structured on-chip stacked zone plates for nanoscale X-ray imaging with high efficiency
Fresnel zone plates are the key optical elements for nanoscale focusing of X‐ray beams with high spatial resolution. Conventional zone plates manufactured by planar nanotechnology processes are limited by the achievable aspect ratios of their zone structures. Additionally, ultra‐high resolution X‐ray optics with high efficiency require 3‐D shaped tilted z...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- CoRR
دوره abs/cs/0503005 شماره
صفحات -
تاریخ انتشار 2005