Control structure design for optimal operation of heat exchanger networks
نویسندگان
چکیده
When only single bypasses and utility duties are used as manipulations, optimal operation of heat exchanger networks (HENs) can be categorized as an active constraint control problem. This work suggests a simple split-range control scheme to implement the optimal operation. The control structure can be found by solving an integer-linear programming (ILP) problem with two objective functions providing optimal split-range pairs (for tracking active constraints during the operation) and appropriate control pairings (for fast control action). A HEN case study is used to demonstrate the application of the proposed design technique. Dynamic simulation shows the ability to provide the optimal operation of the obtained control structure.
منابع مشابه
A Simple Strategy for Optimal Operation of Heat Exchanger Networks
The objective of this work is to propose a systematic procedure to find a control structure for optimal operation of heat exchanger networks. Optimal operation in this context requires that 1) all controlled temperatures are kept at their targets and 2) utility cost is minimized. The degrees of freedom of heat exchanger networks are analyzed and used to identify if the operation is structurally...
متن کاملOptimal operation of heat exchanger networks
The paper discusses optimal operation of a general heat exchanger network with given structure, heat exchanger areas and stream data including predefined disturbances. A formulation of the steady state optimization problem is developed, which is easily adapted to any heat exchanger network. Using this model periodically for optimization, the operating conditions that minimize utility cost are f...
متن کاملOperational Controllability of Heat Exchanger Networks
Process integration is motivated from economic benefits, but it also impacts on the plant behavior introducing interactions and in many cases making the process more difficult to control and operate. During the operation utility flow rates and bypasses are widely used for effective control of process stream target temperatures, but the number of utility units is usually less than the number of ...
متن کاملA Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System
In the presented research, heat transfer of a mobile electrolyte alkaline fuel cell (AFC) (which the electrolyte has cooling role of system) has been considered. Proper control volumes of system with specific qualification have been chosen. Consequently, heat and mass transfer in control volumes have been assessed. Considerations on them and contributed models lead to approve a double tube heat...
متن کاملRetrofit of Heat Exchanger Networks Considering Existing Structure: A New Targeting Procedure
A new retrofit targeting procedure, based on pinch technology has been developed. The new procedure considers existing structure of a given network and finds the most compatible configuration with the network. To achieve this aim, the procedure uses a linear programming technique that maximize the compatibility. Good compatibility between old and new networks helps to make the best use of c...
متن کامل