Fabrication of Highly Ordered Multilayer Thin Films and Its Applications
نویسندگان
چکیده
−A new method is introduced to build up organic/organic multilayer films composed of cationic poly(allylamine hydrochloride) (PAH) and negatively charged poly(sodium 4-styrenesulfonate) (PSS) by using the spinning process. The adsorption process is governed by both the viscous force induced by fast solvent elimination and the electrostatic interaction between oppositely charged species. On the other hand, the centrifugal and air shear forces applied by the spinning process significantly enhance the desorption of weakly bound polyelectrolyte chains and also induce the planarization of the adsorbed polyelectrolyte layer. The film thickness per bilayer adsorbed by the conventional dipping process and the spinning process was found to be about 4 Å and 24 Å, respectively. The surface of the multilayer films prepared with the spinning process is quite homogeneous and smooth. Electroluminescence (EL) devices composed of alternating poly(p-phenylene vinylene) (PPV) and polyanions films show higher quantum efficiency when prepared by the spin self-assembly (SA) method.
منابع مشابه
Simulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملDesigning and Fabrication of Electrochromic Windows Using Tungsten Oxide Films Prepared Through Sol-gel Coating on a Glass
In this study, a sol-gel peroxotungstic acid sol was employed to deposit tungsten oxide (WO3) films by the spin-coating technique. In view of smart window applications, electrochromic windows were then designed and fabricated using a thin tungsten oxide film. For this purpose, Glass/ FTO/ WO3/ electrolyte/ FTO/Glass could be of use due to its special structure that consists of an electrochromic...
متن کاملFabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties
In this research, MgF2-2%SiO2/MgF2 thin films were applied on a glass substrate. At first, MgF2 thin films with the optical thickness were deposited on the glass slide substrates. Then, MgF2-2%SiO2 thin films were deposited on the glass coated with MgF2 thin films. Finally, the nanocomposite thin films were surface treated by the PFTS solution. Characterization of the thin film was done by X-Ra...
متن کاملLiquid crystalline organic semiconductors for organic transistor applications
The recent development of materials for organic field effect transistors (OFETs), including small-molecule and polymer materials, are briefly reviewed, and the problems that remain to be solved prior to practical application and use are discussed. Liquid crystalline materials are good candidates for OFETs because of their advantageous properties over soluble small-molecule materials. Liquid cry...
متن کاملDesign and fabrication of multilayer thin film coated hollow waveguides for enhanced infrared radiation delivery
Metal coated Hollow Glass Waveguides (HGWs) incorporating single dielectric thin films have been widely used for the low-loss transmission of infrared radiation in applications ranging from surgery to spectroscopy. While the incorporation of single dielectric film designs have traditionally been used in metal/dielectric coated HGWs, recent research has focused on the development of alternating ...
متن کامل