An aqueous rechargeable lithium battery of high energy density based on coated Li metal and LiCoO2.
نویسندگان
چکیده
Using a coated Li metal as an anode and LiCoO2 as a cathode, an aqueous rechargeable battery is built up, whose average discharge voltage is 3.70 V. This high voltage stability is due to the "cross-over" effect of Li(+) ions, which is different from the traditional ways of increasing overpotentials. The total energy density can be 465 W h kg(-1).
منابع مشابه
An Aqueous Rechargeable Lithium Battery Using Coated Li Metal as Anode
New energy industry including electric vehicles and large-scale energy storage in smart grids requires energy storage systems of good safety, high reliability, high energy density and low cost. Here a coated Li metal is used as anode for an aqueous rechargeable lithium battery (ARLB) combining LiMn2O4 as cathode and 0.5 mol l(-1) Li2SO4 aqueous solution as electrolyte. Due to the "cross-over" e...
متن کاملAqueous Mg-Ion Battery Based on Polyimide Anode and Prussian Blue Cathode
The magnesium-metal battery, which consists of a cathode, a Mg-metal anode, and a nonaqueous electrolyte, is a safer and less expensive alternative to the popular Li-ion battery. However, the performance of Mg batteries is greatly limited by the low electrochemical oxidative stability of nonaqueous electrolytes, the slow Mg diffusion into the cathode, and the irreversibility of Mg striping and ...
متن کاملLi2MnSiO4 Nanostructured Cathodes for Rechargeable Lithium-Ion Batteries
Rechargeable lithium-ion battery technology dominates the portable electronics market following the rapid growth in demand since the introduction of the first, commercial lithium-ion battery by Sony in 1990 [1]. Motivated by concerns for global warming and environmental degradation, researchers have focused on extending the use of rechargeable lithium-ion batteries to large-scale applications. ...
متن کاملElectrodes with high power and high capacity for rechargeable lithium batteries.
New applications such as hybrid electric vehicles and power backup require rechargeable batteries that combine high energy density with high charge and discharge rate capability. Using ab initio computational modeling, we identified useful strategies to design higher rate battery electrodes and tested them on lithium nickel manganese oxide [Li(Ni(0.5)Mn(0.5))O2], a safe, inexpensive material th...
متن کاملHybrid system for rechargeable magnesium battery with high energy density
One of the main challenges of electrical energy storage (EES) is the development of environmentally friendly battery systems with high safety and high energy density. Rechargeable Mg batteries have been long considered as one highly promising system due to the use of low cost and dendrite-free magnesium metal. The bottleneck for traditional Mg batteries is to achieve high energy density since t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Chemical communications
دوره 49 55 شماره
صفحات -
تاریخ انتشار 2013