Cree XLamp LEDs Solder Joint Reliability Study
ثبت نشده
چکیده
Copyright © 2013-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 w w w .C re e. C O m /X lA m p C LD -A P 34 r ev 1e Cree® XLamp® LEDs Solder Joint Reliability Study
منابع مشابه
Cree XLamp Long-Term Lumen Maintenance
Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. Other trademarks are the property of their respective owners. This document is provided for informa...
متن کاملEffect of substrate flexibility on solder joint reliability. Part II: finite element modeling
Solder joint fatigue failure is a serious reliability concern in area array technologies, such as flip chip and ball grid array packages of integrated-circuit chips. The selection of different substrate materials could affect solder joint thermal fatigue life significantly. The mechanism of substrate flexibility on improving solder joint thermal fatigue was investigated by thermal mechanical an...
متن کاملEffect of voids on the reliability of BGA/CSP solder joints
Voids in solder joints have been considered as a defect in electronics assembly. The factors that affect void formation are complex and involve the interaction of many factors. There are no established standards for void size and void area in a solder joint for it to be deemed defective. Inspection criteria have been very subjective. The effect of voids on the reliability of solder joint may de...
متن کاملEffects of Underfill Delamination and Chip Size on the Reliability of Solder Bumped Flip Chip on Board
An investigation on the solder bumped Flip Chip on Printed Circuit Board (FCOB) is presented in this paper. The emphasis is placed on the effects of delamination crack between the underfill encapsulant and the solder mask on the solder joint reliability of FCOB. In the present study, a fracture mechanics approach is employed. The strain energy release rate at the crack tip between the underfill...
متن کاملLead-free Solder Joint Reliability – State of the Art and Perspectives
There is an increasing demand for replacing tin-lead (Sn/Pb) solders with lead-free solders in the electronics industry due to health and environmental concerns. The European Union recently passed a law to ban the use of lead in electronic products. The ban will go into effect in July of 2006. The Japanese electronics industry has worked to eliminate lead from consumer electronic products for s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017