Quantum Cascade Laser-Based Photoacoustic Sensor for Trace Detection of Formaldehyde Gas
نویسندگان
چکیده
We report on the development of a photoacoustic sensor for the detection of formaldehyde (CH(2)O) using a thermoelectrically cooled distributed-feedback quantum cascade laser operating in pulsed mode at 5.6 μm. A resonant photoacoustic cell, equipped with four electret microphones, is excited in its first longitudinal mode at 1,380 Hz. The absorption line at 1,778.9 cm(-1) is selected for CH(2)O detection. A detection limit of 150 parts per billion in volume in nitrogen is achieved using a 10 seconds time constant and 4 mW laser power. Measurements in ambient air will require water vapour filters.
منابع مشابه
Photoacoustic Spectroscopy with Quantum Cascade Lasers for Trace Gas Detection
Various applications, such as pollution monitoring, toxic-gas detection, non invasive medical diagnostics and industrial process control, require sensitive and selective detection of gas traces with concentrations in the parts in 10 (ppb) and sub-ppb range. The recent development of quantum-cascade lasers (QCLs) has given a new aspect to infrared laser-based trace gas sensors. In particular, si...
متن کاملSEMICONDUCTOR LASER BASED TRACE GAS SENSOR TECHNOLOGY: RECENT ADVANCES AND APPLICATIONS Laser Based Trace Gas Sensor Technology
Recent advances in the development of sensors based on infrared diode and quantum cascade lasers for the detection of trace gas species is reported. Several examples of applications in environmental and industrial process monitoring as well as in medical diagnostics using quartz enhanced photoacoustic spectroscopy and laser absorption spectroscopy will be described.
متن کاملPhotoacoustic Chemical Sensing: Ultracompact Sources and Standoff Detection
Photoacoustic spectroscopy (PAS) is a useful monitoring technique that is well suited for trace detection of gaseous and condensed media. We have previously demonstrated favorable PAS gas detection characteristics when the system dimensions are scaled to a micro-system design. This design includes quantum cascade laser (QCL)-based microelectromechanical systems (MEMS)-scale photoacoustic sensor...
متن کاملUltrasensitive gas detection by quartz-enhanced photoacoustic spectroscopy in the fundamental molecular absorption bands region
A trace gas sensor based on quartz-enhanced photoacoustic spectroscopy with a quantum cascade laser operating at 4.55 μm as an excitation source was developed. The sensor performance was evaluated for the detection of N2O and CO. A noise-equivalent (1σ) sensitivity of 4 ppbv N2O with 3 s response time to (1−1/e) of the steady-state level was demonstrated. The influence of the relevant energy tr...
متن کاملA Sulfur Hexafluoride Sensor Using Quantum Cascade and CO2 Laser-Based Photoacoustic Spectroscopy
The increase in greenhouse gas emissions is a serious environmental problem and has stimulated the scientific community to pay attention to the need for detection and monitoring of gases released into the atmosphere. In this regard, the development of sensitive and selective gas sensors has been the subject of several research programs. An important greenhouse gas is sulphur hexafluoride, an al...
متن کامل