Elastic-Plastic Transition in a Thin Rotating Disc with Inclusion
نویسندگان
چکیده
Stresses for the elastic-plastic transition and fully plastic state have been derived for a thin rotating disc with inclusion and results have been discussed numerically and depicted graphically. It has been observed that the rotating disc with inclusion and made of compressible material requires lesser angular speed to yield at the internal surface whereas it requires higher percentage increase in angular speed to become fully plastic as compare to disc made of incompressible material. Keywords—Angular speed, Elastic-Plastic, Inclusion, Rotating disc, Stress, Transition.
منابع مشابه
Creep Transition in a Thin Rotating Disc Having Variable Density with Inclusion
Creep stresses and strain rates have been obtained for a thin rotating disc having variable density with inclusion by using Seth’s transition theory. The density of the disc is assumed to vary radially, i.e. ( ) 0 / m r b ρ ρ − = ; 0 ρ and m being real positive constants. It has been observed that a disc, whose density increases radially, rotates at higher angular speed, thus decreasing the pos...
متن کاملSteady Thermal Stresses in a Thin Rotating Disc of Finitesimal Deformation with Mechanical Load
Seth’s transition theory is applied to the problems of thickness variation parameter in a thin rotating disc by finite deformation. Neither the yield criterion nor the associated flow rule is assumed here. The results obtained here are applicable to compressible materials. If the additional condition of incompressibility is imposed, then the expression for stresses corresponds to those arising ...
متن کاملElastic-Plastic Deformation of a Thin Rotating Disk of Exponentially Varying Thickness and Inclusion
Transition theory has been used to derive the elastic-plastic and transitional stresses. Results obtained have been discussed numerically and depicted graphically. It has been observed that for disc with exponentially varying thickness (k=2), high angular speed is required for initial yielding at internal surface as compared to the flat disc and exponentially varying thickness for k=4 onwards. ...
متن کاملElastic-Plastic Transition of Pressurized Functionally Graded Orthotropic Cylinder using Seth’s Transition Theory
In this paper the radial deformation and the corresponding stresses in a functionally graded orthotropic hollow cylinder with the variation in thickness and density according to power law and rotating about its axis under pressure is investigated by using Seth's transition theory. The material of the cylinder is assumed to be non-homogeneous and orthotropic. This theory helps to achieve better ...
متن کاملMagneto-Thermo-Elastic Stresses and Perturbation of Magnetic Field Vector in a Thin Functionally Graded Rotating Disk
In this paper, a semi-analytical solution for magneto-thermo-elastic problem in an axisymmetric functionally graded (FG) hollow rotating disk with constant thickness placed in uniform magnetic and thermal fields with heat convection from disk’s surfaces is presented. Solution for stresses and perturbation of magnetic field vector in a thin FG rotating disk is determined using infinitesimal theo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009