Vectoring of Adjacent Synthetic Jets

نویسندگان

  • Barton L. Smith
  • Ari Glezer
چکیده

The formation, evolution, and interactions of a closely spaced pair of coflowing rectangular synthetic jets are investigated using particle image velocimetry. The dynamics of the combined jet is determined by the interactions of the counter-rotating vortex pairs that form each jet. These vortex pairs are formed along the long edges of the orifice of each jet by the time-periodic motion of a diaphragm that is mounted in a cavity underneath the orifice plate and is driven at resonance. It is shown that the phase between the actuation waveforms of the adjacent jets affects the relative timing between their blowing and suction strokes and consequently the formation of the vortex pairs that synthesize each of the jets. These phase variations also lead to controlled vectoring or bending of the combined jet toward the orifice of the jet that is leading in phase and can be varied dynamically on time scales that correspond to the actuation period.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Study of Parallel Jets Scouring, considering the effect of jets distance on erosion rate

The scouring process at downstream of the hydraulic structures is a complex phenomenon and many parameters affecting its amount. Failure to control this phenomenon causes damages to the dam and its associated hydraulic structures. In this research, the scouring caused by the combination of jets outlet from a gated spillway was investigated experimentally and the combination of jets adjacent to ...

متن کامل

Jet Attachment Behavior using Counterflow Thrust Vectoring

A modeling and experimental study was performed to examine the jet attachment process, which can develop during the fluidic thrust vector control of subsonic and supersonic jets. Experiments performed in rectangular jets up to Mach 1.4 revealed that continuous control of jet exhaust is possible with secondary mass flow rates of the order of 1% of the primary jet mass. Under certain operating co...

متن کامل

Stator Diffusion Enhancement Using a Re-circulating Co-flowing Steady Jet

This paper will outline a steady flow control technique that augments the diffusion process within a stator passage via a continuous co-flowing secondary flow stream along the suction surface. The technique is similar to that used for flow vectoring in nozzles where a secondary flow stream is used to enhance the diffusion and vectoring of high speed jets. Diffusion factors in excess of 0.95 are...

متن کامل

Numerical Studies on Thrust Vectoring Using Shock Induced Supersonic Secondary Jet

Numerical studies have been carried out using a validated two-dimensional RNG k-epsilon turbulence model for the design optimization of a thrust vector control system using shock induced supersonic secondary jet. Parametric analytical studies have been carried out with various secondary jets at different divergent locations, jet interaction angles, jet pressures. The results from the parametric...

متن کامل

Numerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow

The mixing characteristics of coolant air jets with the hot gas exiting the gas turbine combustor’s primary zone is of major importance to the combustor exit temperature profile. In the present work, a three dimensional numerical simulation on the basis of the finite volume method was developed. The aim was to investigate the penetration and mixing characteristics of directly opposed rows of co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005