Input Shaping to Reduce Solar Array Structural Vibrations
نویسندگان
چکیده
___________________________________________________________ iii TABLE OF CONTENTS ___________________________________________________ iv LIST OF FIGURES _______________________________________________________ vi LIST OF TABLES_________________________________________________________ x NOMENCLATURE _______________________________________________________ xi
منابع مشابه
Closed-Loop Input Shaping in Discrete-Time LTI Systems
Introduction For linear time-invariant (LTI) setpoint control systems, input shaping is a powerful technique to reduce residual vibrations in those systems as shown in [1]. The targeting trajectory can be optimized (e.g. minimize targeting time or energy consumption) through convex optimization techniques. A broad overview of real-time or nearly real-time applications has been given in [2]. Inp...
متن کاملMinimum vibration maneuvers using input shaping and pulse-width, pulse frequency modulated thruster control
Minimizing the modal vibration induced by on-off thrusters is a challenging problem for designers of flexible spacecraft. This thesis presents the first study of PulseWidth, Pulse-Frequency (PWPF) modulated thruster control using the method of command input shaping. Input shaping for systems with linear actuators has been successfully developed to reduce modal vibrations. Recently, this method ...
متن کاملExperimental Verification of Vibration Absorbers Combined with Input Shaping for Oscillatory Systems
Systems that exhibit flexible dynamics are susceptible to vibration caused by changes in the reference command and from external disturbances. Feedback control is an obvious choice to deal with these vibrations, but in many cases, it is insufficient or difficult to implement. Input shaping does not deal with vibration excited by external disturbances; however it has proven beneficial for reduci...
متن کاملSingle-Source Multi-Battery Solar Charger: Analysis and Stability Issues
In this paper, dynamic analysis of a multi-battery dual mode charger, powered by a single solar array and suitable for lead-acid and lithium-ion cell-based batteries is presented. Each battery is interfaced to the solar array by means of a current-controlled buck power stage, operating either in constant power or constant voltage mode. Operation in former/latter charging mode implies regulating...
متن کاملConcurrent Design of Input Shaping and Vibration Absorbers
Systems that exhibit flexible dynamics are susceptible to vibration caused by changes in the reference command, as well as, from external disturbances. Feedback control is an obvious choice to deal with these vibrations, but in many cases, it is insufficient or difficult to implement. Input shaping has proven beneficial for reducing vibration that is caused by changes in the reference command. ...
متن کامل