UWFDM-1313 Engineering Issues Facing Transmutation of Actinides in Z-Pinch Fusion Power Plant
نویسنده
چکیده
The initiation of the Global Nuclear Energy Partnership includes nuclear-based transmutation devices to recycle the spent fuel. Fusion can offer an alternative to the use of fast reactors for the transmutation of actinides. At a modest fusion power of 20 MW, a Z-Pinch driven sub-critical blanket can burn actinides and produce power. Several engineering issues have been examined: the effect of the sub-critical blanket and its internal fission neutrons on tritium breeding, radiation damage to structure, energy deposition and extraction, and chamber activation. Our initial assessment indicates the Z-Pinch could be an attractive option for burning actinides, but special attention should be paid to the challenging engineering issues.
منابع مشابه
UWFDM-1295 Preliminary Study of Time-Dependent Isotopic Inventory of the In-Zinerator Actinide Management System
Efficient burnup of minor actinides is one of the most promising alternatives for minimizing waste in advanced nuclear fuel cycles. This work examines the concept of employing a Z-pinch driven fusion source in a sub-critical transmutation reactor designed to burn up actinides and generate constant power. Its fuel cycle is designed to allow on-line fission product removal and fuel replenishment....
متن کاملUWFDM-1227 Radiological Impacts of IFE Target and RTL Recycling Option: A Comparative Study
Designers of heavy ion (HI) and Z-pinch inertial fusion power plants have explored the potential of recycling the target and recyclable transmission line (RTL) materials as an alternate option to disposal in a geological repository. Although the physics basis of the HI and Z-pinch concepts is widely different, many of the recycling issues facing both designs are quite similar. This work represe...
متن کاملUWFDM-1382 Activation of W-Based Divertors with Thin Re and Mo Coatings for Fusion Applications
There is a considerable interest in low activation and high heat resistant materials for fusion applications. Tungsten (W) would fulfill these requirements for plasma facing components of future fusion power plants. A novel method developed by SNL to enhance the thermal and dimensional stability of W requires depositing materials such as Re and Mo as a thin coating on the surface of dendritic W...
متن کاملCheng/Cerbone-Page 1 PROSPECT OF NUCLEAR WASTE TRANSMUTATION AND POWER PRODUCTION IN FUSION REACTORS
A small tokamak-based fusion reactor can be attractive for actinide waste transmutation. Equilibrium concentrations of transuranium isotopes were estimated in a molten-salt based fusion transmutation reactor. Nuclear performance parameters were derived for two types of fusion-driven transmutation reactors: Pu-assisted and minor actinidesonly systems. The minor actinide-only burning system appea...
متن کاملZ-Pinch Power Plant Design and IFE Materials Program on Z and RHEPP at SNL
There are presently four driver technologies that are being developed for IFE Power Plants: these are HIF (Heavy Ion Fusion), KrF (Krypton Fluoride laser), DPSSL (Diode-Pumped Solid-State Laser), and Z-Pinches. All four types were included in the discussions at the Snowmass Fusion Summer Study in 1999 [1]. The purpose of this paper is to discuss (1) the z-pinch power plant concept, and (2) the ...
متن کامل