The Effect of Sulfonation Level and Molecular Weight on the Tensile Properties of Polyoxadiazoles
نویسندگان
چکیده
The tensile properties of sulfonated polyoxadiazoles have been studied as a function of molecular weight and sulfonation level. All sulfonated polyoxadiazoles synthesized through a polycondensation reaction of the hydrazine sulphate salt and a dicarboxylic acid in poly(phosphoric acid) exhibit rigid-ductile behavior with high Young’s modulus (3-4 GPa) and with larger elongations at break (up to 120%). Sulfonated polyoxadiazoles with maximum reproducible tensile strength (190 ± 6.9 MPa) could be synthesized in the frame of time of 4-5 h.
منابع مشابه
مطالعه اثر ریزساختار پلیبوتادین خاتمهیافته با هیدروکسیل (HTPB) بر خواص مکانیکی کامپوزیت پرانرژی
The mechanical properties of the final energetic composite depend mainly on the HTPB prepolymer microstructure; thus, the prepolymer microstructure of HTPB is one of the important factors influencing the mechanical properties of high-energy composite based on HTPB resin. In this paper, the effect of microstructure parameters of HTPB on the behavior and mechanical properties of its high-energy c...
متن کاملInsights into the effect of vanadium on chromium-vanadium Phillips catalysts for the ethylene polymerization
The chromium/vanadium bimetallic Phillips catalysts developed by our research group have been proved to be a promising process to produce bimodal polyethylene using a single-reactor process. The vanadium loading of CrV-1/1, CrV-1/2, and CrV-1/3 has a significant effect on the polymerization activity, product molecular weight (MW), as well as th...
متن کاملEffect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
متن کاملAn Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes
There is an increasing demand for air-dry performance of fluorocarbon finished materials. Thus, dyeing with different types of reactive, mono, bi, and multi-functional, dyes was evaluated as a novel treatment to create correct surface interface to maintain fluorocarbon performance without ironing or tumble drying. The effects of pre-treatment on fluorocarbon finishing of cotton fabric, a cellul...
متن کاملNumerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs
In this research, the influence of structure on the tensile properties of single- walled carbon nanotubes (CNTs) is evaluated using molecular mechanics technique and finite element method. The effects of diameter, length and chiral angle on elastic modulus and Poisson’s ratio of armchair, zigzag and chiral structures are investigated. To simulate the CNTs, a 3D FEM code is developed using the A...
متن کامل