Prediction of Vibration Induced Displacement and Its Effect on Tool Wear in Turning Using 3d Finite Element Simulation
نویسندگان
چکیده
This paper presents the three dimensional (3D) finite element analysis to predict the workpiece displacement amplitude and tool wear in face turning of AISI 1040 steel under dry machining condition. 3D vibration induced turning models have been developed and validated by comparing with experimental results so as to identify the correlation. Extensive experimentation and investigators carried out on CNC lathe machine and the details are reported in [1] have been considered for present work. Commercial FE programme is used for simulating turning process. The effect of workpiece displacement due to vibration on the tool wear is critically evaluated.
منابع مشابه
Investigations on the effects of multi-layered coated inserts in machining Ti–6Al–4V alloy with experiments and finite element simulations
This paper presents investigations on turning Ti–6Al–4V alloy withmulti-layer coated inserts. Turning of Ti–6Al–4V using uncoated, TiAlN coated, and TiAlN + cBN coated single and multi-layer coated tungsten carbide inserts is conducted, forces and tool wear aremeasured. 3D finite elementmodelling is utilized to predict chip formation, forces, temperatures and tool wear on these inserts. Modifie...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملSimulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods
Since the electric motor of pure electric vehicle replaced the engine, the "masking effect" disappears, and the problem of vibration and noise of the transmission becomes prominent. This is generated during the gear meshing and is transmitted to the housing through the shaft and bearing. Thereby, radiation noise of the housing are generated. The prediction and analysis...
متن کاملPredictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models
The tool wear is an unavoidable phenomenon when using coated carbide tools during hard turning of hardened steels. This work focuses on the prediction of tool wear using regression analysis and artificial neural network (ANN).The work piece taken into consideration is AISI4140 steel hardened to 47 HRC. The models are developed from the results of experiments, which are carried out based on De...
متن کاملPrediction Model for CNC Turning on AISI316 with Single and Multilayered Cutting tool Using Box Behnken Design (RESEARCH NOTE)
Austenitic stainless steels (AISI316) are used for many commercial and industrial applications for their excellent corrosive resistance. AISI316 is generally difficult to machine material due to their high strength and high work hardening tendency. Tool wear (TW) and surface roughness (SR) are broadly considered the most challenging phases causing poor quality in machining. Optimization of cutt...
متن کامل