New Multisite Cascading Calibration Approach for Hydrological Models: Case Study in the Red River Basin Using the VIC Model

A novel multisite cascading calibration (MSCC) approach using the shuffled complex evolution–University of Arizona (SCE-UA) optimization method, developed at the University of Arizona, was employed to calibrate the variable infiltration capacity (VIC) model in the Red River Basin. Model simulations were conducted at 35 nested gauging stations. Compared with simulated results using a priori parameters, single-site calibration can improve VIC model performance at specific calibration sites; however, improvement is still limited in upstream locations. The newly developed MSCC approach overcomes this limitation. Simulations using MSCC not only utilize all of the available streamflow observations but also better represent spatial heterogeneities in the model parameters. Results indicate that MSCC largely improves model performance by decreasing the number of stations with negative Nash-Sutcliffe coefficient of efficiency (NSCE) values from 69% (66%) for a priori parameters to 37% (34%) for single-site calibration to 3% (3%) for MSCC, and by increasing the number of stations with NSCE values larger than 0.5 from 9% (9%), to 23% (23%) to 34% (29%) during calibration (and validation) periods across all sites. DOI: 10.1061/(ASCE)HE.1943-5584.0001282. © 2015 American Society of Civil Engineers. Author keywords: Hydrological model; Multisite calibration; Optimization; Shuffled complex evolution method–University of Arizona