Microstructured Fibre Taper with Constant Outer Diameter
نویسندگان
چکیده
منابع مشابه
Loss in Microstructured Fibre with a Short Taper
Losses in tapered microstructured fibres have been calculated as a function of shape and length using finite-difference time-domain calculations. Minimal losses are incurred even in non-optimally shaped tapers shorter than 100 micron. The results have important implications for splice losses and device applications.
متن کاملRaman Spectra of a PMMA Microstructured Optical Fibre and Direct Measurement of Its Gain Coefficient
A polymethylmethacrylate (PMMA) microstructured polymer optical fiber (mPOF) is fabricated and characterized. Using the cut-back technique the fiber loss is measured which is higher than the step-index silica fibers. Through a novel experimental scheme, the backward Stokes spectrum of the fabricated mPOF is recorded over a range exceeding 3000 cm‑1 during the cut-back method and compared ...
متن کاملAdvances in infrared and imaging fibres for astronomical instrumentation
Optical fibres have already played a huge part in ground based astronomical instrumentation, however, with the revolution in photonics currently taking place new fibre technologies and integrated optical devices are likely to have a profound impact on the way we manipulate light in the future. The Anglo Australian Observatory, along with partners at the Optical Fibre Technology Centre of the Un...
متن کاملInsertion torque of orthodontic miniscrews according to changes in shape, diameter and length.
OBJECTIVE To determine the variation in the insertion torque of orthodontic miniscrews according to the screw length, diameter, and shape. MATERIALS AND METHODS The maximum insertion torque (MIT) was measured using a torque tester at a constant speed of 3 rotations per minute. Cylindrical and taper type of miniscrews (Biomaterials Korea Inc, Seoul, Korea) with different lengths, diameters, an...
متن کاملA Microstructured Fiber with Defined Borosilicate Regions to Produce a Radial Micronozzle Array for Nanoelectrospray Ionization
This work highlights the possibility of using microstructured fibres with predefined doped regions to produce functional microstructures at a fibre facet with differential chemical etching. A specially designed silica microstructured fibre (MSF) that possesses specific boron-doped silica regions was fabricated for the purpose of generating a radial micronozzle array. The MSF was drawn from a pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017