Effect of Cutting Parameters on MRR and Surface Roughness in Turning EN-8
نویسندگان
چکیده
Surface finish is one of the prime requirements of customers for machined parts. The present paper presents an experimental study to investigate the effects of cutting parameters like spindle speed, feed and depth of cut on surface finish and material removal rate on EN-8. Taguchi methodology has been applied to optimize cutting parameters. The results showed that the spindle speed (the most significant factor) contributed 63.90%, depth of cut (second most significant factor) contributed only 11.32% and feed rate contribution was least with 8.33% for Ra. The contribution for feed and RPM was 60.91% and 29.83%.whereas the depth of cut contributed only 7.82% for material removal rate.
منابع مشابه
Effect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel
ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...
متن کاملExperimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted
Turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. In order to obtain desired surface quality by machining, pr...
متن کاملSurface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects
The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...
متن کاملIntegration of grey-based Taguchi technique in optimization of parameters process during the turning operation of 16MnCr5 steel
CNC turning is widely used as a manufacturing process through which unwanted material is removed to get the high degree of surface rough. In this research article, Taguchi technique was coupled with grey relation analysis (GRA) to optimize the turning parameters for simultaneous improvement of productivity, average surface roughness (Ra), and root mean square roughness (Rq).Taguchi technique L2...
متن کاملOptimization of CNC Turning Parameters on Aluminum 7015 Hybrid Metal Matrix Composite Using Taguchi Robust Design
-The Aluminum Hybrid Metal Matrix Composites (Al-HMMC) are finding numerous applications in many areas like Automobile, Piston and Cylinder and Aerospace, etc. Adding a third element into the metal matrix composite makes it hybrid. The Reinforcement of SiC and Graphite used in this Al-HMMC improves its strength. The present investigation is to find the optimum machining parameter of CNC turning...
متن کامل