Direct-drive and Eddy-current Septum Magnets

نویسنده

  • S. H. Kim
چکیده

Two types of thin septum magnets, direct drive and eddy current, were c mainly in 2-D magnetic aspects. For the direct-drive type, the leakage field depend finite permeability of the magnet core and not on the thickness of the septum conduct suggested that the leakage field be controlled by reducing the current in the septum c or by using a correction coil. There were no significant differences between the t regarding thermal problems caused by high current densities in the thin septa. Th fields with 2-mm septum thicknesses were calculated using OPERA-2d to compare types. For the eddy-current type, the leakage fields calculated using OPERA compared with the calculations from Halbach’s model. The leakage fields for the edd type decayed with long time constants.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

European Organization for Nuclear Research Cern - Sl Division Cern-sl-2000-033 Bt a Novel Eddy Current Septum Magnet for Sps Extraction towards Lhc and Cngs

A new East Fast-Extraction System is under construction in the SPS, to supply particles with a maximum batch length of 7.8 μs and 10.5 μs to the LHC and to CNGS (CERN Neutrino to Gran Sasso), respectively. The extraction septum magnets actually used at the SPS have been designed for slow extraction over several seconds and have large cooling and electrical power demands. A fast system of only 2...

متن کامل

New Synchrotron Injection Septum Magnet at the Aps*

A new direct-drive, out-of-vacuum synchrotron injection septum magnet has been built at the Advanced Photon Source to replace the existing eddy-currentshielded, in-vacuum magnet. We describe the design, assembly, construction, and measurements.

متن کامل

Modelling of Eddy-current Losses in a Surface-mounted Ndfeb Permanent-magnet Generator

In a surface-mounted sintered NdFeB permanent-magnet generator, the magnets are usually thin (typically 4 mm), and hence the armature reaction, due to the time harmonics in the stator currents, is high. NdFeB magnets are conducting (resistivity typically 1.6 μΩm) and experience eddy-current losses. Therefore, the combined eddy-current losses in the NdFeB magnets and a solid iron rotor may becom...

متن کامل

Modeling of Eddy Current Loss and temperature of the magnets in Permanent magnet Machines

The eddy current loss in the magnets of permanent magnet (PM) motors in a hybrid electric vehicle (HEV) and plug-in HEV is usually not taken into consideration in traditional motor design and analysis. However, due to the high conductivity of the rare-earth magnet, neodymium-iron-boron (NdFeB), and slot/tooth harmonics, there is eddy current loss generated inside the magnets. This loss may not ...

متن کامل

A Combined Experimental and Finite Element Analysis Method for the Estimation of Eddy-Current Loss in NdFeB Magnets

NdFeB permanent magnets (PMs) are widely used in high performance electrical machines, but their relatively high conductivity subjects them to eddy current losses that can lead to magnetization loss. The Finite Element (FE) method is generally used to quantify the eddy current loss of PMs, but it remains quite difficult to validate the accuracy of the results with complex devices. In this paper...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001