“BioProzessTrainer” as training tool for design of experiments

نویسندگان

  • Ralf Pörtner
  • Oscar Platas-Barradas
  • Janosh Gradkowski
  • Richa Gautam
  • Florian Kuhnen
  • Volker C Hass
چکیده

Concept Design and optimization of cell culture processes requires intensive studies based on “Design of experiments”-strategies. In academia teaching of DoE-concepts is often insufficient, as in most cases only simple culture strategies (batch) can be performed, as time and money are limited. More complex tasks such as feeding strategies for fed batch culture can be discussed theoretically only. To close this gap the virtual “BioProzessTrainer”, a model based simulation tool, was developed. It supports biotechnological education with respect to process strategies, bioreactor control, kinetic analysis of experimental data and modeling. Along with a set of examples for different control and process strategies (batch, fed batch, chemostat etc.) learners are prepared for real experiments [1,2]. The “BioProzessTrainer” (Figure 1) helps to improve the quality of education by using interactive learning forms and by transmitting additional knowledge and skills. Costs for practical experiments can be minimized by reducing plant operation costs. Here a concept for teaching DoE-concepts for batch(optimization of e.g. substrate concentrations and inoculation cell density) and fed-batch-processes (evaluation and optimization of feeding strategy) using the “BioProzessTrainer” is shown.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Design and Realization of a Gait Rehabilitation Training Robot with Body Supporting Mechanism

With the increasing number of people who have problems with their walking, a new type of gait rehabilitation training robot has been put forward and designed. In order to meet the requirements of the gait rehabilitation training, the whole mechanical structure and control system have been designed, and the model machine for gait rehabilitation training robot has been made. Using the human gait ...

متن کامل

Investigation on Tensile Strength of Friction Stir Welded Joints in PP/EPDM/Clay Nanocomposites

Polymer-based nanocomposites due to their advantages such as corrosion resistance,adequate mechanical properties and low cost are widely used in modern technologies. The increasing application of these nanocomposites, and hence their welding seems unavoidable. In this paper, a novel hottool in friction stir welding process is used for butt welding nanocomposite plates of 5 mm thick containing p...

متن کامل

Compaison the Effectiveness of Systemic and Constructivist Instructional Design Models in Designing the Problem – Based Environment of On-the-Job Training Program for Teachers

This study aimed to raise the effectiveness of On-the-Job Training Program for teachers. It was done by using quasi experimental method. To measure variables pretest –posttest design with control group was used. The population consisted of On-the-Job Training courses for teachers from Lamerd town which were held in 2012. By using convenience sampeling method 3 samples were selected which were r...

متن کامل

Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models

The tool wear is an unavoidable phenomenon when using coated carbide tools during hard turning of hardened steels. This   work focuses on the prediction of tool wear using regression analysis and artificial neural network (ANN).The work piece taken into consideration is AISI4140 steel hardened to 47 HRC. The models are developed from the results of experiments, which are carried out based on De...

متن کامل

Investigation of the Effective Parameters on Surface Roughness in Magnetic Abrasive Finishing Process Using Design of Experiments

In this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the SiC Abrasive slurry and Al2O3, use of diamond paste as abrasive tool) in Magnetic Abrasive Finishing process using designing of experiments on the external surface of Cylindrical work pieces of Stainless steel AISI 440C to get minimum surf...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 5  شماره 

صفحات  -

تاریخ انتشار 2011