Modelling sediment export, retention and reservoir sedimentation in drylands with the WASA-SED model
نویسندگان
چکیده
Current soil erosion and reservoir sedimentation modelling at the meso-scale is still faced with intrinsic problems with regard to open scaling questions, data demand, computational efficiency and deficient implementations of retention and re-mobilisation processes for the river and reservoir networks. To overcome some limitations of current modelling approaches, the semi-process-based, spatially semi-distributed modelling framework WASA-SED (Vers. 1) was developed for water and sediment transport in large dryland catchments. The WASA-SED model simulates the runoff and erosion processes at the hillslope scale, the transport and retention processes of suspended and bedload fluxes in the river reaches and the retention and remobilisation processes of sediments in reservoirs. The modelling tool enables the evaluation of management options both for sustainable land-use change scenarios to reduce erosion in the headwater catchments as well as adequate reservoir management options to lessen sedimentation in large reservoirs and reservoir networks. The model concept, its spatial discretisation scheme and the numerical components of the hillslope, river and reservoir processes are described and a model application for the meso-scale dryland catchment Isábena in the Spanish Pre-Pyrenees (445 km2) is presented to demonstrate the capabilities, strengths and limits of the model framework. The example application showed that the model was able to reproduce runoff and sediment transport dynamics of highly erodible headwater badlands, the transient storage of sediments in the dryland river system, the bed elevation changes of the 93 hm3 Barasona reservoir due to sedimentation as well as the life expectancy of the reservoir under different management options. Correspondence to: E. N. Mueller ([email protected])
منابع مشابه
Assessment of reservoir sedimentation by mathematical model GSTARS3 on Masjed Soleyman dam in Khuzestan Province-Iran
Accumulation of sediment transport volume and reduce the useful life of dams, water storage tanks can be. So far, many methods for calculating sediment this is presented in reservoirs are generally classified into two categories: mathematical modeling and experimental .This study examines the effect of using Gstars model parameters in the model, deposition of sediment in the reservoir tank and ...
متن کاملOne dimensional simulation of flushing sediment through reservoirs
Control of sedimentation in reservoirs of dams is considered to be one of the most important issues in exploitation of dams and increasing their useful life. Reservoirs act as traps for sediments and prevent transport of sediments to the river. The deposited sediments will decrease the capacity of the reservoirs so that they cannot be in use any more. Various methods are discussed in this study...
متن کاملCFD Application in 3D flow filed modeling of a large dam reservoir
In the present paper, a 3D numerical model has been applied to predict the flow hydrodynamics around power intakes within the Dez dam reservoir. The Dez dam is a 203 m high, double arch concrete dam which is constructed by Italians in 1962. Since then, sedimentation in reservoirhas continued and since the dam does not have bottom outlet, the reservoir bed level is raising by a rate of about 2.5...
متن کاملCalibration of Area-Reduction Empirical Method for Dam Reservoir
The mathematical model of Area-Reduction empirical method is written through MATLAB software. Three periods of the hydrologic survey are required to run, calibrate and validatethe model. The Dez Dam, which is one of the most significant dams of the Middle East with three periods of hydrographic surveys in 1972, 2002 and 2011, has been chosen for the investigation. The annual average of the inpu...
متن کاملبررسی فرایند ته نشینی و تحکیم رسوبات چسبنده مخزن سد دز
Sedimentation and consolidation of cohesive sediments near the dam body can cause many problems such as clogging the bottom outlets and entering the sediments into the hydropower intakes. Flushing of these sediments through the bottom outlet will be successful only if the hydraulic conditions are designed according to the physical and mechanical properties of consolidated sediments. During the ...
متن کامل