Rapid Fabrication of Non-Assembly Robotic Systems with Embedded Components
نویسندگان
چکیده
In this paper, the application of Rapid Prototyping in fabricating non-assembly robotic systems with inserts is presented. Previous work demonstrated the use of the Rapid Prototype Stereolithography and Selective Laser Sintering techniques to fabricate prototypes of mechanical mobile joints. As examples of their applicability, the joint designs were then used to fabricate complex multi-articulated, multi-link, multi-loop systems in one step, without requiring assembly while maintaining the joint desired mobility. Expanding upon this, current research explores methods of insertion of component parts during the rapid prototype process. The Rapidly Prototyped Mobile Observation Vehicle (RP MOVe), was fabricated to demonstrate this method and is presented here.
منابع مشابه
Procedure for Rapid Fabrication of Non-assembly Mechanisms with Embedded Components
In this paper, the application of Rapid Prototyping in fabricating non-assembly robotic systems and mechanisms with inserts is presented. Previous work demonstrated the use of the Rapid Prototype Stereolithography and Selective Laser Sintering techniques to fabricate prototypes of mechanical mobile joints. As examples of their applicability, the joint designs were then used to fabricate complex...
متن کاملAWARD, DMI-9984051 Program: NSF - Engineering Design Program Project Title: "Design of Robotic Systems Using Analytical Methods and Rapid Prototyping" RAPID FABRICATION OF NON-ASSEMBLY MECHANISMS WITH EMBEDDED COMPONENTS
In this paper, the application of Rapid Prototyping in fabricating non-assembly robotic systems and mechanisms with inserts is presented. Previous work demonstrated the use of the Rapid Prototype Stereolithography and Selective Laser Sintering techniques to fabricate prototypes of mechanical mobile joints. As examples of their applicability, the joint designs were then used to fabricate complex...
متن کاملHybrid Deposition Manufacturing: Design Strategies for Multimaterial Mechanisms Via Three- Dimensional Printing and Material Deposition
This paper describes a novel fabrication technique called hybrid deposition manufacturing (HDM), which combines additive manufacturing (AM) processes such as fused deposition manufacturing (FDM) with material deposition and embedded components to produce multimaterial parts and systems for robotics, mechatronics, and articulated mechanism applications. AM techniques are used to print both perma...
متن کاملDesign and Fabrication of Ultralight High-Voltage Power Circuits for Flapping-Wing Robotic Insects
Flapping-wing robotic insects are small, highly maneuverable flying robots inspired by biologicalinsects and useful for a wide range of tasks, including exploration, environmental monitoring, searchand rescue, and surveillance. Recently, robotic insects driven by piezoelectric actuators have achievedthe important goal of taking off with external power; however, fully autonomous operation requir...
متن کاملSpecial Issue: Fabrication of Fully Integrated Robotic Mechanisms
The past two decades have seen immense strides being made in novel fabrication techniques, particularly in additive manufacturing (AM) technologies, also known as “rapid prototyping” and “3D printing,” as well as in novel subtractive techniques such as laser-cutting and waterjet-cutting. The most popular practical technologies, such as fused-deposition modeling (FDM), stereolithography, selecti...
متن کامل